Can anyone show me a picture of the arrangement of the baffle stack in the muzzle end of the XM 1 bullpup shroud. I'm quite pleased with the size and handling of the gun and accuracy was OK but had to return it to the dealers as it was low on power. Accuracy was all over the place when I got it back. I found bits of pellet stuck in the baffles and one dented baffle. It looks like the shroud has been removed and the baffle stack hasn't been replaced properly or the shroud hasn't been refitted properly allowing the baffles to move and get clipped by pellets. I've removed all baffles and fitted an external moderator and it shoots fine but I would like to refit the existing bits if I can. Need to find a supplier of the baffles to replace the dented one!
Any suggestions welcome.