Admin's pet.
them there springer's are soooooo addictive
Has not one but two workbenches in his shed
Cheers, the mech should fit into a traditional sized stock which a can through bolt and add a plate for strength, just thinking how I can make something to do the draw and lock it into the mech, possibly with a Magazine to load a BB into the sling as its pulled back.
You'll Shoot your eye out Kid
Admin's pet.
The 2 front pins move when fired .....the trigger then locks the pins so you can load the ball bearing and pouch into it ....the two front pins holds back the bearing etcOriginally Posted by Segata
Admin's pet.
When the triggers released the pins go back to their normal cocked position
Has not one but two workbenches in his shed
I'm sort of getting an idea how it could work in my head, main workings of the recocking mech will be overtop to avoid fouling on the jaws as they lock closed and possibly trigger the mag as it passes and can be operated with a grip underneath to make operation less strenious.
I'm still full of cold and this Gum infection but I'll get some rough design sketches done to plan things out.
You'll Shoot your eye out Kid
Registered User
just find any old cheap stock on the bay.. you are only going to chop it around anyways..
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Admin's pet.
I have a 1022 stock here just incase
Posting Permissions
Reply With Quote