Printable stock patterns?

[Segata]

Technically maybe not an Airgun but just an Airgun part, Joffy mentioned to me the other day parts for a Slingshot rifle and I've been pondering on how to make it ever since, I know I don't want to make it Fowler style as it'll be difficult for me to cock and load so ideally I want to maybe have something like a pump action or lever on a one piece stock, are there printable patterns for them out there that I can look at and maybe adapt from a conventional rifle or Air Rifle into a Slingshot rifle?

Blanks seemed a little pricey for what I can afford when I had a brief look so I'll be more than likely needing to shape it myself, figured out the sling part in my head as thats the easy bit, just get a premade set of forks or adapt an existing Catty frame to bolt on the front of the stock which will be as far forward as possible as ideally this thing should be more capable than what a hand drawn one should achieve.

[joffy]

https://cults3d.com/en/3d-model/vari...asy-print-b3sd

[Segata]

I can't 3D print sadly, was thinking more a paper pattern to draw out onto wood that I could shape by hand, I did watch one made with scrap metal and engine parts that looked pretty cool but I'm not able to weld and probably would burn the house down if I tried in lol.

[joffy]

I can't 3D print sadly, was thinking more a paper pattern to draw out onto wood that I could shape by hand, I did watch one made with scrap metal and engine parts that looked pretty cool but I'm not able to weld and probably would burn the house down if I tried in lol.

I'll measure this trigger block up that I have here for you.....its the forks that you might have trouble with

[joffy]

The 3d picture was just something to aim for

[joffy]

https://youtu.be/og_USjppt9s?si=Y80roglnzi5Tm4Rs