Quote Originally Posted by Neil54 View Post
Thinking aloud.
My lad could use a better shroud on his rifle.
I can buy 1m of carbon tube, have it delivered through the post. I make a couple of bushes, fill it with hair curlers and pan scrubbers.
Non of the above are individualy gun parts.
Once assembled and the intention is to fit to a gun, does it then become a gun part and cannot be posted ( except parcelforce 48) .
If I then break it down back into component parts to post, am I posting hair curlers or moderator parts.
Just thoughts.
As stated above. But don’t use pan scrubbers. I have used hobby felt or old towelling to good effect in the past. I have just made a shroud using delrin for the end pieces, and also for the holding piece at the barrel end, which has venting slotscut into it to give back venting. They are held in place usingM5 black nylon studs. I also used 3mm felt pads on the face of the delrin baffles, Velcro hair curlers with no wrap in this case. When shooting at the range, the guy next to me said he could only hear the action.

I don’t post them anywhere, as anything I make is just for me.