Results 1 to 3 of 3

Thread: HW44 PCP Pistol problem

  1. #1
    Join Date
    Sep 2023
    Location
    Derby
    Posts
    16

    HW44 PCP Pistol problem

    Hi, a mate of mine has a problem with his HW44 pistol, it’s fully charged with air but not firing the pellet in the breech. Any help would be appreciated.

    Also does anyone know if you can send a pistol to Hull Cartridge direct? Our local RFD want £25.00 each way.


    Thanking you in anticipation.
    Last edited by glam69; 01-04-2024 at 09:20 AM.

  2. #2
    Join Date
    Nov 2002
    Location
    Wakefield, West Yorks
    Posts
    1,412
    It could be that the regulator is not working as it should so over pressurising. You can check this by de-pressuring the cylinder down to around 50 bar and then see if it will fire.

  3. #3
    Join Date
    Aug 2010
    Location
    Southampton
    Posts
    724
    Loaded more than one pellet by mistake?

    Any sound at all when trigger is pulled?

    Friend had issues with his HW110 and these folks sorted it with a service https://hw100tuning.co.uk/ would hazard a guess it'll be cheaper to get them to do it rather than Hull Cartridge once you factor in RFD fees, postage, and whatever HC will charge

    Likely to be something very simple, Weihrauch are known for two things, ugliness, and reliability, if it's not working it'll be easy solved
    TX200 .177 21mm TL | TX200HC .22 22mm TL | Prosport .22 22mm TL
    HW40 | HW45 | Diana Mod5 | Webley Senior....... Because PCP is like kissing your sister (apparently)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •