pp700w will not fill

[ALBERT 66]

Just purchased this on here but when pumping air leaks sreight of the barrel .so no air stays in the cylinder. i cocked the hammer when trying to fill with my pump but same thing happens, i only have a pump. any ideas.

[madcarlos]

Just purchased this on here but when pumping air leaks sreight of the barrel .so no air stays in the cylinder. i cocked the hammer when trying to fill with my pump but same thing happens, i only have a pump. any ideas.

Not enough pressure, If gun is empty you will most probably need a tank to fill it,

[Neil54]

May need a quick blast of air from a bottle to shut the valve.
As you have no bottle, you could try finger over end of the barrel to give some back pressure.

Empty gun of pellets, cock the hammer, close the bolt, pump the pump.

[mdunn]

It might need a blast of air,from a bottle?. Atb Mick. Where in leeds are you, as I've a fill bottle.

[ALBERT 66]

Thanks for your replies.

[rapidresponse1]

as has been said a quick blast from air bottle