Gerald Cardue report - BSA 240 Magnum

[Collector]

Has anyone got a copy of Gerald Cardue's report on the BSA 240 Magnum pistol? I remember reading it in the past but can't find a copy online. I now have one of these pistols so I'd find it interesting to re-read the article. Thanks in advance 🙂

[Abasmajor]

I have a nice example from 1995 which came with paperwork including an “Air Weapons Final Inspection Certificate” stamped for accuracy compliance at 25yds ! The pistol is quite top heavy which puts some owners off, but I get along with it fine now that I have become accustomed to it. Mine doesn’t really live up to the “Magnum” tag but quite powerful enough for most purposes. The polystyrene packing tray within the box has what looks like it has extra provision for a longer cylinder and I believe there were plans to include this which never made it into production.



Brian

[Collector]

Nice looking pistol Brian. I had mine out earlier shooting sat down with both hands at a large Birchwood Casey target at 8 yards. Mine does group but needs more elevation. It likes RWS roundheads (177) but I might try some heavier JSB's as I understand they might give more hight. We will see.

[Abasmajor]

Nice looking pistol Brian. I had mine out earlier shooting sat down with both hands at a large Birchwood Casey target at 8 yards. Mine does group but needs more elevation. It likes RWS roundheads (177) but I might try some heavier JSB's as I understand they might give more hight. We will see.

Mine is in .22 calibre and shoots well with RWS Hobby wadcutter pellets. I have found these also work well in .177 calibre on my older spring powered air pistols which seem to prefer lighter pellets.

Brian

[ashf9999]

I’ll dig out the copy I got with Gerald Cardew’s evaluation 240 Magnum. It’s his typed copy, rather than as it appeared in the magazine, complete with various BSA paperwork. Bought it from Mr Dyson a few years back. No idea who had it before me.

[Collector]

I’ll dig out the copy I got with Gerald Cardew’s evaluation 240 Magnum. It’s his typed copy, rather than as it appeared in the magazine, complete with various BSA paperwork. Bought it from Mr Dyson a few years back. No idea who had it before me.

Ah, thank you. Much appreciated. 👍

[greenwayjames]

I’ll dig out the copy I got with Gerald Cardew’s evaluation 240 Magnum. It’s his typed copy, rather than as it appeared in the magazine, complete with various BSA paperwork. Bought it from Mr Dyson a few years back. No idea who had it before me.

One of Mr Cardews sources of income from his airgun work was from selling, usually by post, copies of his technical articles etc. all printed out on a large old photocopier in his front room.
It sounds like that may have been the source.

[Garvin]

Has anyone got a copy of Gerald Cardue's report on the BSA 240 Magnum pistol? I remember reading it in the past but can't find a copy online. I now have one of these pistols so I'd find it interesting to re-read the article. Thanks in advance 🙂

John Atkins, asked me to post this:

[Collector]

Thanks for posting that article. Interesting about the position of the transfer port. I'm not sure if mine is clipping pellets. Just need to do a bit more testing. I've just ordered some heavier pellets.

[johnbaz]

I've a couple of Magnums, A mk1 and a mk2, Have to say, The breech seal being held in place in the mk2 is a huge improvement as I was shooting my mk1 and after loading something caught my eye as I closed the barrel, Looked down and noticed the breech seal on the ground!

I was very careful to ensure it was still in situ each time I loaded it after that!



John