Reply With QuoteSadly no, been wanting one for years though as they are handy for a lot.Originally Posted by lightning22
Zebedee
That's why I suggested a dry run with photos. I looked at the parts diagrams and immediately had to run to the toilet.
This is where the Rekord wins hands down. All in one just make sure you reset it.
And agreed re the Rekord.
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- May 4/5, 2024.........BOING!!
Has not one but two workbenches in his shed
Sadly no, been wanting one for years though as they are handy for a lot.
You'll Shoot your eye out Kid
Donor Fixer
Ping me your address, I've just run one off and it has printed really nicely.
Wanted - Venom Mach 1/2 Trigger
Has not one but two workbenches in his shed
If I had the parts I'd do the 25 first for practice as it's a weaker and simpler looking gun from what I can tell, I still need to message Dan so I'll ask him best approach etc and about that tool as I'm not sure on species of the wood I have to hand.
In the mean time I guess I can do the work on the Daisy, similar principle in a way, that I'm going to try an wing it with chopsticks as they should be strong enough to get the spring block free, she's technically been waiting the longest too as she is what started my journey, seeking how to mod her was what brought me into the greater hobby and probably why 1 Gun quickly multiplied.
You'll Shoot your eye out Kid
Killer Vampire Lesbians on scooters
What could possibly go wrong?
[IMG][/IMG]
God rest ye jelly mental men
Has not one but two workbenches in his shed
Im a master of F'ups I'll have you know lol
You'll Shoot your eye out Kid
Has not one but two workbenches in his shed
Apologies only just seen this, I shall PM you now, thank you.
You'll Shoot your eye out Kid
Registered User
No pics but its just a 2" offcut of broomhandle with a hole drilled in towards one end & the wood cut out with a coping saw to the end to notch it to clear the pin to use a spring compressor on it for taking apart. Goes in the rear end of cylinder after removing the plastic end cap.
Has not one but two workbenches in his shed
The one Lightning22 made arrived today, it sounds like it's a similar shape to it so should this one break I'll make one using it as a template however this once feels very sturdy so should last a long time.
I'm now painting the Airsoft Beretta but it'll be next on the Bench once I've cleaned and prepped the area, wish me luck Lads.
You'll Shoot your eye out Kid
Posting Permissions
