TX200 Piston Washer

[Junes1]

I've just taken a TX200 apart for a friend because it was low on power only to find the piston washer so smashed up it was almost dust
Where is the best place to buy a new one?
The gun must be 20yrs old. I'm assuming there aren't loads of variations??
Thanks.

[MeHadger]

I've just taken a TX200 apart for a friend because it was low on power only to find the piston washer so smashed up it was almost dust
Where is the best place to buy a new one?
The gun must be 20yrs old. I'm assuming there aren't loads of variations??
Thanks.

Do you mean the piston seal, or the washer at the base of the spring?
Airarmsspares.com is my go-to 👍🏼 Should be about £12 plus post.
All mks of TX and PS use the same seal, and probably also washers if it is a guide washer or something you need.
If it’s been running without a piston seal, inspect the piston head and inside comp tube for damage 👍🏼

[MeHadger]

Also possibly the bearings you’re talking about, the delrin circular bands fore and aft on the piston, probably about a fiver and worth checking that when pinched closed they still stand very slightly proud of the metal faces 👍🏼

[deejayuu]

Worth trying a maybe

[Junes1]

Will call airarmsspares.com tomorrow 👍

[Turnup]

I recently replaced the piston seal, piston bearings and main spring on mine. Got all of the bits from T W Chambers

[barrel]

I've just taken a TX200 apart for a friend because it was low on power only to find the piston washer so smashed up it was almost dust
Where is the best place to buy a new one?
The gun must be 20yrs old. I'm assuming there aren't loads of variations??
Thanks.

Chambers.

Kindest regards

Barrel

[venoman]

seals do Air Arm seals

[MrGreengrass]

Britseals...as good as the Australian ones.
Both my TX have them and they are very good indeed.

[deejayuu]

Worth trying a maybe

Oops! Worth trying a Briteals maybe