Theoban eliminator help needed

[BigDave15]

Hi was wanting to know if anyone knows were I could get a service kit or seal kit for a Theoban eliminator? as there is no power at all it won't move a pellet at all in it ?
Thanks in advance

[the growler]

If your Eli only uses orings, am sure you can find out the correct sizes that you need. Or contact Chris whistler. He used to run impact airguns

[BigDave15]

Thank you Growler I haven't checked yet as I was wanting to get some advice 1st. And I guess there is no way of knowing until its stripped.

[Benelli B76]

Is the gas ram pumped to correct pressure ?

Baz

[BigDave15]

Is the gas ram pumped to correct pressure ?

Baz

Hi Baz I didn't even know there was a gas ram, I thought it was basically the same as an older Weihrauch I had that just worked through spring etc .

[Shed tuner]

does it still have a firm cocking force ?
And does it recoil when fired ?

If so, but the pellet doesn't leave, the piston head / o-rings have failed, buit the ram is fine... or the barrel is jammed up, but I;m discounting that !

[BigDave15]

does it still have a firm cocking force ?
And does it recoil when fired ?

If so, but the pellet doesn't leave, the piston head / o-rings have failed, buit the ram is fine... or the barrel is jammed up, but I;m discounting that !

Thank for your reply, real strong cooking pressure, and a lot of recoil, so hopefully it is as you say, and hopefully I can get the right size O rings for it. Just have to attempt to strip it down now.
Thanks