Sharp Innova cracked breech

[BC312]

Call me stubborn, but I still like the original plastic breech.
This is the first time I've bought an Innova with this problem, all my other ones are in top condition.
I don't think that one cracked breech means that all Innova's are to be avoided.
They are a joy to shoot. Light, powerful, laser accurate. I will try to repair the breech, but I expect it won't be succesful. In that case I hope to find a donor gun / spare breech.
Will be fine!

They were very popular back then so i am sure you will find spares.

[jirushi]

An update.
I followed Colin g's advice, and completed the fracture, so to speak. It was very easy to do; the crack was even worse than I thought.



Then I roughened the surfaces, for the glue to work better.



After degreasing, I applied the JB Weld 50139 Plastic Bonder.
Not a good photo, but on here I wanted to show that I enlarged the tp, with the intention to use a metal tp insert (a piece of a 4 mm metal tube), and secure that in place with epoxy putty.
I thought that might give this weak spot some more strength, than only glueing it together?
Any ideas on this?



I expect my repair to be unsuccesful.
But who knows.

[BC312]

Looks like the crack has spread. Another thing that destroys plastic over time is oil depending on plastic and UV light.

[Shed tuner]

I hope it works out.. I think it has a fighting chance at least, and you certainly have nothing to lose...

Personally, I'd make something up in metal... brass would be nice