Gunpower Stealth Silencer Query

[hawk5377]

Just purchased a Gunpower Stealth .177 which is great but the standard silencer that came with it is not very effective.
I see that a modular silencer is available to add to the existing one.
Does anyone have any experince of how well it works and also I assume it goes between the gun and the existing silencer but is it the same size and shape.
My question being does it cosmetically match the standard stealth silencer.
Also if anyone has a Laptop Stealth case they want to sell then please let me know.
Nick Hawkins

[zebedee71]

Buy some 40mm washers from B&Q and some 40mm drain pipe and make your own baffles

Mine is modded and is WHISPER quiet make the first chamber (at the muzzle end ) the largest (longest) and each from there shorter. I have 5 chambers in mine and MAN it works great

Oh and if there is anything you wanna know?

www.talonownersgroup.com

Zeb

[hawk5377]

Cheers to murdoch133 for selling me a Laptop Bag.
Not sure about making a DIY silencer.
DIY stands for Don't Involve Yourself.
Nick

[EGGY]

The std Stealth silencer is indeed pants , get yrself a 1/2 in UNF adaptor from AGSand fit any can you like

[ora8i]

Have a look on my site, I made baffles and added them to my Stealth can it was a considerable improvement. The write up describes adding baffles to a Xocet XS silencer but it's the same for a Stealth just fatter


Regards ors

[zebedee71]

I have to baffle out the can for the Alros next

If it's as succesfull as the Talon one i will be happy

Zeb

[hawk5377]

Thanks for the info guys.
Looks like I will have to try the DIY route, still interested to know if anyone has tried the Modular one that Gunpower sell.
Nick

[Dragonboy]

Thanks for the info guys.
Looks like I will have to try the DIY route, still interested to know if anyone has tried the Modular one that Gunpower sell.
Nick

I've found the extra Module a complete waste of £30 as the extra sound reduction was very marginal.

I say your best option is to get an adapter and alternative silencer.

Got rid of my Stealth in the end but thats another story.

[Big Si]

I had an adapter made up by "Leupy" from this forum it's 1/2" UNF and I've fitted a Logun silencer. Much quieter and it makes the gun look much better (IMO) I want a HW carbon fibre one but I've not got the money yet.

Rgds

Big Si

[dodgemaster]

I have a brass adapter male to male somewhere in my bits n pieces I think they are about £15 if you bung me a fiver you can have it

[JJSTEALTH]

i db'd a few of my rifles and found the stealth hardly any louder from the front (shooting just air) but from the side it was the loudest,
its the valve that sits in front of your face that makes it sound loud,and theres a few mods around to keep it quiet,
if you put a few baffles in the can it makes all the differance,
as for the mod silencer it made the gun sound very quiet and i was impressed ........until i shot pellets through it,
no matter how i screwed it on all i got was clipping,pellets everywhere,
total crap
i couldnt get it to work at all,

JASON..

[hawk5377]

Hi Jason
I have contacted Dodgemaster to get the adpater he is offering to try the Logun and the RWS ultimate that I have.
Is the Modular one the same size as the standard one so the two look good together, also what length is it and is it very heavy.
I presume it goes between the gun and the standard silencer.
Nick

[JJSTEALTH]

yep it goes between the gun and original can,
the can is 6" long (5" internal) and the mod is 3" long (2" internal)
but its not made very accuratly (bit like my speeling )
JASON..