DIY - bog standard easy peasy
Hopefully getting a MK1 BSA SUPERSTAR .22 very soon......
Thought i'd ask who can service them - replace seals/spring/guides/install tuning kits etc.....
Cheers
Daz
DIY - bog standard easy peasy
Have heard you have to remove the scope rail to get the piston and rotating breech out to change the seals....
Don't fancy attempting that!
Daz
Daz.. i dont mind giving it a bash for you.. done a fair few.. never done a superstar before..
Thanks for the offer......
Do vmach do a service/tuning for the superstar?
ATB
Daz
Thanks for the link but would want someone to service it and replace all seals
Cheers
Daz
[QUOTE=russian sniper;6456668]Have heard you have to remove the scope rail to get the piston and rotating breech out to change the seals....
Just done a similar one, i held the gun up-side down an using two blocks of real hard wood (one on top of the other) (to give plenty clearance) knocked the rail till it came away, this is of-course after un-doing the bolt at the back of the rail,, was quite easy.
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
No probs daz..if you can get the orings etc, the offer still stands
Thanks anyway.... but looking to get a shop/vmach to do it
Cheers
Daz
"But we have our own dream and our own task. We are with Europe, but not of it. We are linked, but not comprised. We are interested and associated, but not absorbed."
Winston Churchill 1930
It's getting the bugger back on that's the problem
Pete[/QUOTE]
Oh Great,, something to look forward too then.
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
"But we have our own dream and our own task. We are with Europe, but not of it. We are linked, but not comprised. We are interested and associated, but not absorbed."
Winston Churchill 1930