Hi all.
I was just wondering If there Is such a thing as proper ''gunsmiths screwdrivers''. By that I mean a screwdriver that wont mangle up the bolt head when trying to take the stock off. I'm just looking for a few suitable drivers of different size that will fit the bolt head of a couple of air rifles without causing the usual unsightly damage,
Atb,
John
Last edited by Steve C.; 29-09-2018 at 03:29 PM. Reason: added info
AirArms S400k L/H (.177)BTAS, tuned, AirArms S410k L/H (.177) walnut, BTAS tuned, AA MPR .177 L/H walnut (STOLEN) and...L/H EV2
BASC
Chapman screwdriver sets have parallel ground tips for gun use.
Winchester Gunsmith Screwdriver Set, 33 Pieces
Just seen this on a Amazon, not bad for £11.54
Got a set of Gunsmith bits and a driver...
Nearly all the interchangable bit screwdrivers have parallel sided flat heads and theres pretty decent sets out there from just a fiver.
Just be aware that Winchester set has imperial hex bits, not metric - so only really relevant to US guns
I have this and I'm pretty certain that these are the same as Amazon/Winchester but with metric hex keys.
https://www.wilko.com/en-uk/ultra-st...iece/p/0286633
Also similar, but with longer reach hex and torx keys, I have this also.
https://www.diy.com/departments/magn...1780179_BQ.prd
[QUOTE=Portzy;7572065]I have this and I'm pretty certain that these are the same as Amazon/Winchester but with metric hex keys.
[url]https://www.wilko.com/en-uk/ultra-steel-screwdriver-set-38-piece/p/0286633[/url
It's not the same
https://jet.com/product/DAC-Technologies-WINGSD-Winchester-33-Piece-Screwdriver-Set/3aaa1b55d78747209e3dc10357367d48
Also with the magnusson set I can only see maybe two flat head bits? And they look small
Last edited by cozzamec; 30-09-2018 at 06:35 AM.
https://www.amazon.com/Wheeler-Space.../dp/B000RZG5NY
perfect for my Weihrauch airrifles and BKL mounts