I have lost count of the number of times I have seen shooters on a sighting in range with four or five different makes of pellets opened in front of them, taking five or so shots with each type and then saying that their gun is not grouping.

Whenever a brand of pellets is changed (sometimes even different batches of the same pellet) or if the barrel has been cleaned then the barrel has to be "conditioned" to that particular pellet by putting at least ten shots (I do 20 to be on the safe side) through it before trying a group.

Different brands of pellets have different percentages of elements in them which affect hardness, coefficient of friction, B.C's etc which all have an effect.

Just thought a "Heads-Up" on this subject might stop a bit of frustration....

Neil