-
Automatic Target Project
Hi,
After seeing some self resetting falling plate type targets on the internet.
Like these :- http://www.doublealpha.biz/airsoft-i...setting-popper
We are attempting to do something similar.
I have now found an even better PCB board to control the Model Servos with.
Here http://www.pololu.com/catalog/product/1350
It is a self contained PCB with a USB interface for programming.
It will control up to 6 servos and you can use the servo outputs as micro switch inputs as well.
I think you could control three servos with three microswitches from one board.
The best bit is the whole board is only about £22
You then just need the servo £10 and a microswitch £0.50 and a 4.8V NiMh battery pack (I have loads from my model flying days)
Then I have to write some script routines to make it all work
I'll keep you posted. (Update to follow below)
Thanks
Mark
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules