Falke 33 assistance urgently required

[slow_runner]

Would anyone be prepared to remove their Falke 33 end cap and post some images and dimensions?
The current project pistol has had a rough life and is missing some components, namely the end cap and fore sight.
Images and dimensions of the original end cap are required.
The mainspring has been cut and is of unknown heritage so a coil count and dimensions of an original mainspring would be valued.
The small spring that assists the barrel release is also missing; the blind hole in the barrel cradle is evident but it cannot be seen if the barrel had a nib/pin etc to contain the spring. See, we have no way of knowing if the barrel fulcrum has been altered /modified. If it is possible, a clean macro shot showing the spring in situ would be very helpful .
Thanks all.

These are images from my post on the AVA & Falke forums.

They may also provide some assistance for anyone contemplating dismantling their Falke 33.

http://smg.photobucket.com/user/spee...44de8.jpg.html

The cocking arm old repair; this will need a tidy

http://smg.photobucket.com/user/spee...41b86.jpg.html

http://smg.photobucket.com/user/spee...4c890.jpg.html

The custom synthetic seal along with the old piece of cow hide

http://smg.photobucket.com/user/spee...41c31.jpg.html

Run over by a truck????

http://smg.photobucket.com/user/spee...3efef.jpg.html

http://smg.photobucket.com/user/spee...b202d.jpg.html

http://smg.photobucket.com/user/spee...c9944.jpg.html

http://smg.photobucket.com/user/spee...f80bc.jpg.html

http://smg.photobucket.com/user/spee...9dbb9.jpg.html

http://smg.photobucket.com/user/spee...66443.jpg.html

http://smg.photobucket.com/user/spee...e9ba0.jpg.html

The custom end cap.
If someone could send clean images and dimensions of an original end cap that would aid greatly in producing another as near original as possible

http://smg.photobucket.com/user/spee...7f746.jpg.html