Quote Originally Posted by tinbum View Post
If you don't have access to a lathe you could probably find something around the house to roughly replicate it.
My trigger mod consists of 2 small pieces of plastic cut from an old nectar card and glued into place under the trigger so it rests on the stop pin. I then filed the plastic away to the point it had no play and no travel, and fires right on the pull (I also drop tested to see if it released the hammer as its right on the sear edge, done without the barrel in and no co2 loaded for safety). The result is a clean predictable break, and better accuracy.

I've added a stripdown guide for anyone interested in dis-assembling these.
http://www.airgunbbs.com/showthread....stol-stripdown