Quote Originally Posted by Otley View Post
For an oil finish, I use Rustins teak oil - their data sheet says that it contains tung oil and is the same as Danish oil except that it does not have the matting agent that Danish oil does, so will build up to a higher sheen.

If I'm finishing an open grain walnut, I use shellac or French polish to fill the pores, then sand off the surplus and oil as normal.

For a gloss finish with all the pores filled, I use a small spray gun to spray Tru oil. Over time, the Tru oil seems to sink in to the wood and gives a classy sort of finish, but any dinks need a sanding and respray.

Used teak oil on arrow shafts for years to waterproof them. Also it has crossed my mind to try teak oil on stock. Will give it a go when a stock requires an oil up.