-
gtfreight,
I like my springers to be around 10 - 10.5 ft.lb.
To this end, I fitted a 0.22" Wonky Donky (Mr. Price) service kit into my 0.177" HW99S.
With no compression washer, the rifle put out a hair under 10 ft.lb.
The cocking was much easier than when the rifle was making ca. 11 ft.lb.
In addition, Welsh Willy has had some softer springs made up for his kits - he will happily supply you with a soft HW99 spring and will also cut it to whatever length you would like.
I once needed a -15 mm spring for my TX, and Welsh Will happily supplied it at no extra cost
Have fun & a good Sunday
Best regards
Russ
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules