Quote Originally Posted by Neil54 View Post
Adjusting the trigger would not invalidate a warranty.
My Brococks have to have the stock removed to adjust the triggers.

Do you have instructions to adjust the trigger?
The threaded rod adjusting the 1st stage is self explanatory once the stock is removed.

The 2mm (?) Allen screw is hidden in front of the trigger blade. I screwed mine in in stages until it wouldn't cock then backed it off ever so slightly until it did. Now they are both (Reggie & Ronnie) far better than the factory settings. Try the stock bump test after.

Ive also removed the 'O' ring in the front bridge to make the barrel a bit more free floating.

HTH
Ian