Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: John Bowkett Blueprinted BSA Super Ten MKIII Bull Barrel(.22) FAC has arrived!!!pics

  1. 01-04-2006, 03:14 AM #1
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    John Bowkett Blueprinted BSA Super Ten MKIII Bull Barrel(.22) FAC has arrived!!!pics

    My worst fears have been put to rest, the package arrived in tact in week's time from the U.K. to me in California...

    Upon opening the package I was amazed at the Walnut Stock which Mr. Bowkett hand picked for me...then I unpacked the action and was stocked at the metal work on the custom Bull Barrel Shroud that he built for this rifle...

    As an fyi, in building this quality rifle, he went so far as to asking the factory to deliver a new action to his home for my gun as the one he was building at the time wasn't to his liking, professional craftsman qualities that I truly respect. Additionally as a side note, after John learned that my first Super Ten that arrived from him didn't like JSB Exacts(5.52) at all, only the 5.51's which are harder to come by, he included in this shipment a replacement barrel and permanently attached custom FAC Silencer to swap in with a separate target and the tin of 5.52 Exacts that he shot the group with!!! I still have to install the barrel but am nothing short of amazed at this craftsman's professionalism.

    After mounting the action, a Beeman One Piece Medium Mount and a Bushnell Elite 4200 6 - 24 x 40AO Mildot Scope, I filled the buddy bottle on my FX Compressor and sighted in quickly, only took 10 clicks to the right and 5 clicks down to be in the bullseye at 20 yards...

    As with my other 12 FPE JB Blueprinted S10, this gun is a dream to shoot and angel fart quiet!!! Hopefully the weather allows me to shoot it more sometime soon, forecasted wet and ugly for the next 5 days in the San Francisco Bay Area!!!

    If you're considering a high end PCP rig, I suggest considering the BSA line up, the Super Tens especially...and if you can spend a little more jingle, have Mr. Bowkett work his magic on the rifle...

    Regards,

    Tony

    http://i40.photobucket.com/albums/e2.../JBS10BBRS.jpg

    http://i40.photobucket.com/albums/e2...BS10BBRSBS.jpg

    http://i40.photobucket.com/albums/e2...BS10BBRSFS.jpg

    http://i40.photobucket.com/albums/e2...g/JBS10BBS.jpg

    http://i40.photobucket.com/albums/e2.../JBS10BBLS.jpg

    http://i40.photobucket.com/albums/e2...BS10BBLSBS.jpg

    http://i40.photobucket.com/albums/e2...BS10BBLSFS.jpg

    A pic of the test group Mr. Bowkett shot with my rifle while range testing it:

    http://i40.photobucket.com/albums/e2...BS10FACGRP.jpg
    Reply With Quote Reply With Quote
  2. 01-04-2006, 09:39 AM #2
    dazzpol's Avatar
    dazzpol
    dazzpol is offline Registered User
    Join Date
    Jan 2003
    Location
    Bourton on the Water. Gloucestershire UK
    Posts
    4,335

    Thumbs up

    Great stuff..

    Dazz
    Reply With Quote Reply With Quote
  3. 01-04-2006, 02:36 PM #3
    aeron's Avatar
    aeron
    aeron is offline Big pipe tuner
    Join Date
    Apr 2002
    Location
    Aberystwyth
    Posts
    4,630
    nice woodwork
    http://www.tonyhancock.org.uk/
    Reply With Quote Reply With Quote
  4. 01-04-2006, 02:37 PM #4
    bullbarrel's Avatar
    bullbarrel
    bullbarrel is offline Systems Administrator
    Join Date
    Nov 2005
    Location
    Gone West Young Man
    Posts
    20,269
    It looks nice.

    It doesn't look like the "standard" BSA bullbarrel
    http://www.bsaguns.co.uk/?ID=53&ProductID=587

    More like the non bullbarrel with a very large silencer.

    I did like the touch that JB used an American coin to show the group sizing.

    Lovely bit of wood too.
    Reply With Quote Reply With Quote
  5. 01-04-2006, 02:43 PM #5
    allanb
    allanb is offline Registered User
    Join Date
    Dec 2005
    Location
    Barnstaple N. Devon
    Posts
    2,203
    Loverly looking gun
    Rude Fat Dog 10/22Browning Buckmark pistol
    Reply With Quote Reply With Quote
  6. 01-04-2006, 03:18 PM #6
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    Yep, gotta love John's work, craftsmanship and performance...

    Quote Originally Posted by dazzpol
    Great stuff..

    Dazz
    Thinking about sending him my Hornet Multishot now!!!

    Regards,

    Tony
    Reply With Quote Reply With Quote
  7. 01-04-2006, 03:20 PM #7
    Slacker24seven
    Slacker24seven is offline Registered User
    Join Date
    Nov 2005
    Location
    Worcester
    Posts
    3,999
    Quote Originally Posted by Trojan1994
    Thinking about sending him my Hornet Multishot now!!!

    Regards,

    Tony
    No no no ask him to do a new scorpion for you. Then you have another gun

    Reply With Quote Reply With Quote
  8. 01-04-2006, 03:20 PM #8
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    I was shocked,

    Quote Originally Posted by aeron
    nice woodwork
    I was told the walnut BSA used was not typically as figured as what is found normally on U.S. rifle stocks, then I get my S10 and WOW!!!

    John certainly sorted me out!!!

    Regards,

    Tony
    Reply With Quote Reply With Quote
  9. 01-04-2006, 03:22 PM #9
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    JB provided another suprise with the unique shroud...

    Quote Originally Posted by bullbarrel
    It looks nice.

    It doesn't look like the "standard" BSA bullbarrel
    http://www.bsaguns.co.uk/?ID=53&ProductID=587

    More like the non bullbarrel with a very large silencer.

    I did like the touch that JB used an American coin to show the group sizing.

    Lovely bit of wood too.
    I knew I was gettting a custom FAC Shroud but was assuming it would look like a factory shroud but with nicer metal, possibly longer and custom bits internally...

    Extremely happy with what I received to say the least...haven't seen any other S10's with this set up yet...

    Regards,

    Tony
    Reply With Quote Reply With Quote
  10. 01-04-2006, 03:24 PM #10
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    Wonderful Shooting Rifle as well!!!

    Quote Originally Posted by allanb
    Loverly looking gun
    :-)

    Regards,

    Tony
    Reply With Quote Reply With Quote
  11. 01-04-2006, 03:25 PM #11
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    You have a very good point there!

    Quote Originally Posted by Slacker24seven
    No no no ask him to do a new scorpion for you. Then you have another gun
    Gonna have to think about that option as well!!!

    Regards,

    Tony
    Reply With Quote Reply With Quote
  12. 01-04-2006, 03:34 PM #12
    Slacker24seven
    Slacker24seven is offline Registered User
    Join Date
    Nov 2005
    Location
    Worcester
    Posts
    3,999
    In fact... you may as well do both.

    A bowketted hornet, scorpion and S10 would be a fairly good line up.

    You may as well even get an ultra while youre at it

    Reply With Quote Reply With Quote
  13. 01-04-2006, 08:16 PM #13
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    You're quite right,

    Quote Originally Posted by Slacker24seven
    In fact... you may as well do both.

    A bowketted hornet, scorpion and S10 would be a fairly good line up.

    You may as well even get an ultra while youre at it
    hopefully it doesn't get me into too much trouble with the wifey!!!

    Regards,

    Tony
    Reply With Quote Reply With Quote
  14. 01-04-2006, 08:20 PM #14
    Slacker24seven
    Slacker24seven is offline Registered User
    Join Date
    Nov 2005
    Location
    Worcester
    Posts
    3,999
    Also... how does that full length silencer compare to normal, shorter silencers? And the BB which will be louder obviously

    Reply With Quote Reply With Quote
  15. 01-04-2006, 08:56 PM #15
    Trojan1994
    Trojan1994 is offline Registered User
    Join Date
    Jul 2004
    Location
    California, USA
    Posts
    1,169

    This FAC Bull Barrel(Long Silencer) is

    Quote Originally Posted by Slacker24seven
    Also... how does that full length silencer compare to normal, shorter silencers? And the BB which will be louder obviously
    much quieter than my FAC Hornet Multishot .22 Rifle which has the permanently attached factory SAS Moderator...

    Compared to my 12fpe Super Ten(.177) Bull Barrel Rifle(factory stock, unmodified in any way) its as quiet, just a different pitch...quiet, more of a "choo"...a fast but low pitched report, more akin to what a silenced gun in the movies sounds like...

    Compared to my John Bowkett Blueprinted Super Ten(.22) Rifle with custom FAC Silencer, its a little louder...this rifle's report is more of a baby's breath "sput" at the muzzle...

    Regards,

    Tony
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. BSA Hornet Multishot(.22) LONG Rifle ala John Bowkett (pics)
    By Trojan1994 in forum General Airgun.
    Replies: 3
    Last Post: 09-06-2006, 09:27 PM
  2. John Bowkett Blueprinted Super Ten Bull Barrel(.22) FAC - The Tease(pic) and Wait!!!
    By Trojan1994 in forum General Airgun.
    Replies: 2
    Last Post: 30-03-2006, 06:01 PM
  3. My Super Ten Bull Barrel (.22) arrived last night!!!
    By Trojan1994 in forum General Airgun.
    Replies: 10
    Last Post: 11-02-2006, 06:07 PM
  4. John Bowkett Blueprinted BSA Super Ten MKII has arrived!!! (pics)
    By Trojan1994 in forum General Airgun.
    Replies: 7
    Last Post: 31-12-2005, 02:46 AM
  5. LOGUN S16 bull barrel vs super 10 bull barrel
    By JAG1 in forum General Airgun.
    Replies: 8
    Last Post: 11-03-2005, 08:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules