if it aint broke.....
Does any one actually service there`s every year ? or do you just shoot till something goes wrong?.
Ta
Ris
if it aint broke.....
I service mine once a year ,after the main HFT season ,after being dragged though the muck at Quarry for a year it needs it.
I thoroughly clean the barrel and the hammer ,guides ,and trigger assembly ,and inspect the inside of the air cylinder every two years.
QUARRY TEAM MEMBER 4 TIMES UKAHFT TEAM WINNERS .AA S400 GINB FT STOCK TASCO 2.5X10X42 AA TX200HC TASCO 2.5X10X42
STAY SAFE AND HAPPY SHOOTING
thats my view tooOriginally Posted by Gary C
If it gets a real soaking, and loses consistency over the chrono, its worth checking the rod the hammer runs on, as there may be rust on it. I polish mine with Autosovol, (and the hammer rod..! , then degrease it. They are designed to run dry, so don't oil it. Otherwise, its as Gary says....
Gus
The ox is slow, but the earth is patient.
Okidoki, thnx for the advice
Ris
seconded, unless it goes wrong dont mess with it, i just used to oil my bolt with moly greaseOriginally Posted by Gary C
Yeah, what Gary said.Originally Posted by Gary C
But I clean my barrel once a year whether it needs it or not.