John Bowkett

[airgunalex]

Hi Alex,

Spare parts? Probably.

Power levels? Definitely.

He's a very down-to-earth and helpful bloke.

MM

think i might have to consider getting it done some time...
Thanks for the help

[Rabbitsniper]

What does the blue print include
????

[airgunalex]

What does the blue print include
????

he changes some of the stock parts to his own parts which were on the blue print when he first designed it. they have to change certain parts from the blue print to mass produce it and by putting in the previously designed parts it makes it smoother and more efficient. think he also checks power levels so you can get the optimum of around 11-11.5 ft lbs.
Alex

[GEOFF]

You can read more here if you haven't already
http://bsaog.co.uk/forum/index.php?topic=11.0

[airgunalex]

if i get the Regulator, blueprint and extended air reservoir on a .177 ultra what amount of usable shots would there be off one fill roughly?

[Airwolf 1968]

ive got a ultra as above a 280 fill gives max 45 177 shots


wayne

[airgunalex]

ive got a ultra as above a 280 fill gives max 45 177 shots


wayne

thanks for quick reply would you say that the extended reservoir is a good worthwhile one or would the regulator and blueprint be ok? im just a bit hesitant about the cost of all 3 together

[Airwolf 1968]

thanks for quick reply would you say that the extended reservoir is a good worthwhile one or would the regulator and blueprint be ok? im just a bit hesitant about the cost of all 3 together

you'll looking at a bill of around £200 for all three
you'll get a better deal from MR BOWKETT if you have all 3 at once splitting it would cost 30-40 per item more due to post

eg blueprint MR BOWKETT charges £95 plus your postage

all 3 =£200 plus your postage so id save up get all 3 at once

as for is it worth it yes yes yes

[albrown]

you'll looking at a bill of around £200 for all three
you'll get a better deal from MR BOWKETT if you have all 3 at once splitting it would cost 30-40 per item more due to post

eg blueprint MR BOWKETT charges £95 plus your postage

all 3 =£200 plus your postage so id save up get all 3 at once

as for is it worth it yes yes yes

Blueprints are 75 pounds or were when I had them done...

[TIKKA-2459]

Hi anyone got contact details for John Bowkett ?

[PCPShooter]

look on Facebook for John Bowkett fan page

[MARSH]

I had a r10 done by John Bowket best R10 I have owned

[MartynB]

You won't regret it

[averageplinker]

Price will depend on the work you want but a full blueprint on an S10 is around 70 quid. Jon isn't to far from you, he's based in Solihull.

I think you will find a full blue print tune on a Superten is a lot more than that

[mdunn]

That was in 2007. Atb mick