a bit difficult due to the OD of the existing shroud.
Best to try and get everything out and replace the baffles and endcap
Does anyone know of a half decent silncer that will fit on the end of a Air Arms Pro-Sport?
I picked a second hand one up cheap at a car boot sale and unfortunately for such a lovely gun it been a bit neglected. One problem is the internal baffles have been shot away. I've got most of the remenants out but there is too much stuck inside to replace the baffles as they would no longer fit inside the shroud.
So, I want to put one on the outside. Are there any that would fit?
Cheers.
a bit difficult due to the OD of the existing shroud.
Best to try and get everything out and replace the baffles and endcap
Thanks for the reply.
I've tried to get everything out but left inside are a few tubes that supported the baffles. They appear to be araldited inside and I can't think of any way to get them out
Anyone got any ideas?
B.A.R. do a full length barrel shroud/silencer in carbon fibre.Originally posted by Cyrilll
Anyone got any ideas? [/B]
H.T.H.
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Phone Air Arms, see what they say...
In my experience, they've always been more than helpfull
Worst case if the baffles are stuck, maybe sending the action to AA see if they can sort it out?
Either way it's worth a phone call to find out
In my experience the baffles are just a friction fit, Chambers do a complete set for little money and they work quite well, a silencer would really spoil the looks of a prosport.Originally posted by Cyrilll
Thanks for the reply.
I've tried to get everything out but left inside are a few tubes that supported the baffles. They appear to be araldited inside and I can't think of any way to get them out
Anyone got any ideas?
If you can hook them out with a bent piece of coat-hanger? they are simple enough to replace.