i have used my menace at 10x all the way, latest to about 8pm and i did not have so much trouble as others have explained. Even though the reticle allows easy and fast hold over, i can't get my self not to dial the shot. i have my turret marked and the 0.1mil increment on the Turret allows my 31grain pellet to reach 120meters in one turn which for me is the biggest plus. Yes indeed you can hold over but holding over 2.3 mils is not that precise unless it was full 0.5mils. if you are engaging 6" plates it's not problem but for those tiny kill zones i love the dial. The knobs are large and don't slip.
For me the reticle is just there to help me correct my dialing in for windage mostly. Say i dial 1mil for windage and i see the impact 1.5mil left, i just dial 0.5mil more. Did i say how easy it makes it to get your drop chart with the Falcon Menace?
you set up that usual big piece of card board. keep same point of aim and shoot. once you read how low you are in mils eg 5mils, just turn the knob to 50, if you are 5.5Mils low just turn it to 55. when you use traditional mildot and MOA like the lightstream, you have to go through that damn conversion whereas now its spot and dial
) when i showed the system to my friends at the club they where delighted, it truly allows and almost guarantees 2nd shot hits after correction. If you have a reactive backstop ex a stone wall at very long air rifle distances, you take aim at a point, squeeze, wait a second or two till you see impact, count the lines and dial everything accordingly. if you do everything right you will hammer that spot. plant pots are great to practice on past the 100m line, your friends will be delighted to see you take off those pots on the second shot past 100meters
)))