Chrony PC Interface Cable project.

[Stot]

im banned from the sales section so im in the dark re the details of this. can someone pm me the article?

Its not there yet mate, but one is ear marked for you already.

Cheers
Stot

[BTDT]

Thanks ill get it up later.

You might care to rephrase that.

[SpikeG]

Thanks ill get it up later.

Cheers
Stot

Fnar Fnar

Don't forget to put one aside for me please Andrew (It's a damn sight neater than my cobbled together board )

Sounds good.

Is it ok over a long cable...say 35yds

Count me in

Yes and no. The chronys TTL signal has a distance limitation of about 10 feet, while RS232 can go up to 50 feet (~15m) although most specs will say ~25 feet, USB is about 15 feet. So 50 feet is a theoretical maximum (chrony > RS232 adapter > extension > PC)
You can get RS232 signal boosters to extend the range but you would need 2 possibly 3 of these.

[Photosbykev]

Not very cheap but it possible to extend the usb range by using a USB > Cat5 cable > USB extension system

[remorfer]

Hi,

I'd like one including USB adapter too if you take paypal.
I'd be happy to pay a little more for p&p, since I'm on the continent

Cheers,

Johan Daes

[Photosbykev]

put me down for a cable and usb adaptor please Just need paypal addy for payment

[Parabuteo]

There should be a stereo jack socket on it.

Where??

[Parabuteo]

Fnar Fnar

Don't forget to put one aside for me please Andrew (It's a damn sight neater than my cobbled together board )



Yes and no. The chronys TTL signal has a distance limitation of about 10 feet, while RS232 can go up to 50 feet (~15m) although most specs will say ~25 feet, USB is about 15 feet. So 50 feet is a theoretical maximum (chrony > RS232 adapter > extension > PC)
You can get RS232 signal boosters to extend the range but you would need 2 possibly 3 of these.

You would probably get away with further with 232 TBH, we used to run it silly distances (I was an AMX programmer till I saw the light, got paid a damn sight more and have more fun...chav trapping)

[Parabuteo]

Nope...deffo an F-1 Chrony but no jack socket

If it had one, where should it be??

[Parabuteo]

more to the point, where the bloody hell has the sales section gone

[SpikeG]

Nope...deffo an F-1 Chrony but no jack socket

If it had one, where should it be??

Looking at the chrony from the front, on the left hand side of the display unit (actually on the side of the chrony if you like) you should see a hole. If your chrony is pre 2001 (iirc) then it won't be fitted.

You can see the hole in this pic (just)

http://www.airgunbuyer.com/ecommerce.../chrony-f1.jpg

[Parabuteo]

I have just found the ruddy socket.....

Belive it or not, I are actually a technician

How embarrassing

[SpikeG]

more to the point, where the bloody hell has the sales section gone

Try altering your location to your nearest town and PM'ing a mod (they must be on a purge )

[SpikeG]

I have just found the ruddy socket.....

Belive it or not, I are actually a technician

How embarrassing

I used to do stuff like that to (ex bench engineer)

[Parabuteo]

Looking at the chrony from the front, on the left hand side of the display unit (actually on the side of the chrony if you like) you should see a hole. If your chrony is pre 2001 (iirc) then it won't be fitted.

You can see the hole in this pic (just)

http://www.airgunbuyer.com/ecommerce.../chrony-f1.jpg

Errrrr,,,,Spike

Guess what I just found

What a dick

I saw the test rig piccy....I'll fetch my coat