Results 1 to 12 of 12

Thread: adjustable rear sight for pistols

  1. #1
    Join Date
    Jun 2008
    Location
    FLINT NORTH WALES
    Posts
    2,119

    Question adjustable rear sight for pistols

    hi folks, could anyone please advise me as to where i can get the above?
    i'm after 3, 1 for a beretta 92fs/cp88 competition and a colt 1911.
    i think the same sight fits all 3, but i've just been on the uttings web sight and it says that they are discontinued so not sure where to look.
    i've seen a millets one for a colt 1911 with a dovetail fitting but i'm not 100% sure that would fit.
    all info welcome and greatfully recieved.
    atvb
    dean

  2. #2
    sol1821 is offline I'm back from resting, and I have the Jaffacakes!!
    Join Date
    Mar 2008
    Location
    newport
    Posts
    3,752
    yes the same sight fits all 3.
    bar do them i think but they are about 50 quid each
    I've seen sites in the states that do them for less than 20 but it was never worth my while ordering just one what with the p&p, but if you were getting 3 it might be worth looking
    also stock up on mags they are really cheap
    Particle physics gives me a hadron.
    Sliced bread.
    The best thing since ripped up bread.

  3. #3
    Join Date
    Jun 2008
    Location
    FLINT NORTH WALES
    Posts
    2,119
    what, mags at b a r or in the states?

  4. #4
    Join Date
    Jul 2004
    Location
    Sunny Manchester
    Posts
    1,380
    Hi Dean,

    If you're struggling to find them, give Brocock a call direct. That's what I did for my 1911 sights, and they sorted me out no problem by mail order.

    Just don't imagine that by going direct to the UK Distributor you'll be getting a better price, but the service is good.

  5. #5
    Join Date
    Jun 2008
    Location
    FLINT NORTH WALES
    Posts
    2,119
    thanks for that mike, i'll have to give them a ring as their website is being re-done.

  6. #6
    sol1821 is offline I'm back from resting, and I have the Jaffacakes!!
    Join Date
    Mar 2008
    Location
    newport
    Posts
    3,752
    nar if you order the sights from the states, mags are 2-3 quid each over there, and they will still be light enough to be worth posting
    Particle physics gives me a hadron.
    Sliced bread.
    The best thing since ripped up bread.

  7. #7
    Garry's Avatar
    Garry is offline I scrolled the page up too fast and it fell off
    Join Date
    Jul 2008
    Location
    Birmingham
    Posts
    8,902
    Brocock wouldn't deal with me when I phoned them up about some PX4 mags, I was told to go to a shop. Can't find them in the shops, that's why I tried Brocock.
    Tried them again with an email last week and no reply.
    I only live about 12 miles from them as well

  8. #8
    Join Date
    Jan 2010
    Location
    Brierley Hill
    Posts
    208
    The sights are expensive...but WELL worth it! It'll transform your pistol from a guess and hope lead flinger to a bonafide bullseye blaster! Well made too, 50 quid is a bit steep but you gotta think about how many of these they sell...it's not a big market really!

  9. #9
    Join Date
    Oct 2008
    Location
    Winslow
    Posts
    2,194
    Not suprised at £50

  10. #10
    Join Date
    Dec 2004
    Location
    North Bristol outskirts
    Posts
    1,685
    Quote Originally Posted by sol1821 View Post
    yes the same sight fits all 3.
    bar do them i think but they are about 50 quid each
    I've seen sites in the states that do them for less than 20 but it was never worth my while ordering just one what with the p&p, but if you were getting 3 it might be worth looking
    also stock up on mags they are really cheap
    But they are sold as individual kits for each model as the adjustable rearsight is higher than the standard so a higher foresight is needed, these are different on the CP88, Colt and Beretta, you need to get the kit to suit your pistol.
    Jef
    AKA Porthos, a Piskateer of Renown.
    I am a pistaholic, and proud of it

  11. #11
    Join Date
    Jan 2010
    Location
    Brierley Hill
    Posts
    208
    Would these sights fit the H&K P30? It looks as if there is a dovetail groove to fit them same as the others, but I'm not sure if the foresight is replaceable....anyone know for sure?

  12. #12
    Join Date
    Jun 2008
    Location
    FLINT NORTH WALES
    Posts
    2,119
    Quote Originally Posted by jefL View Post
    But they are sold as individual kits for each model as the adjustable rearsight is higher than the standard so a higher foresight is needed, these are different on the CP88, Colt and Beretta, you need to get the kit to suit your pistol.
    thanks for that , didn't realise about the difference in the foresight.
    atvb
    dean

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •