Is the calibre not stamped on the rifle? Have you got a vernier guage, if so you could measure the barrel
bought a bearcat carbine today in 177 ?, fitted up a scope and went to zero ,
found up some bisley practice pellets in 4.5 mm, only to have them slide staight down the barrel and out, could this actually be a .20 ? were these an option, as i have no .20 pellets, ime not to sure what i have here, any ideas.
Is the calibre not stamped on the rifle? Have you got a vernier guage, if so you could measure the barrel
If you choke a smurf, what colour does it turn?
We Are Tottenham! Super Tottenham! We Are Tottenham From The Lane!
no calibre stamped, unable to measure, cant get silencer/barrel weight off, and no room to get gauge in where pellet seats.
congratulations,ive been looking for a bearcat for a while now..20 was an option.
you could measure the probe thickness?
atb
steve
no, probe tapers off in front of an o ring, will try and get hold of some .20 pellets and update post, thanks for your replys
bought some .20 pellets today, and yes a .20, zeroed in and shoots well, have some pics but struggling to get them up, gun seems to have a brass barrel, pellet probe.
A bearcat in .20 if factory original is a bit of a rare one as is any falcon in .20 so well done mate!.
ATB
Steve