-
LP5 question
Hi all, just a quick question......what is the threaded bush/surround for in which the power adjuster screws into?
TIA
me
-
I know on the LP10 it is the locking ring for the adjustment screw to stop it turning. You lock it with a small hex grub screw from the side.
HTH
Mark
-
Looking at the exploded drawing.
http://host17.ssl-net.net/steyr-spor.../ba_lp50_c.pdf
It looks like the grub screw is at the top 12:00 position under the sight rail.
I know there is a fine balance on the LP5 / 50 with the power and sear system to make sure it all cycles properly. I would be careful if you adjust anything.
HTH
Mark
-
don't think its a locking grubscrew...ahh didn't know the rearsight base could slide
edit that...it does seem to lock the adjuster surround
Last edited by ikarma70; 11-10-2010 at 09:42 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules