Please excuse my ignorance but is the silencer adaptors a new manufactured part, like the Whisperer adaptor, or a modification of the existing foresight unit?
ATB
Ian
Hi, i have been looking for Innova spares and noticed it is difficult in finding any new spares or in some cases ie silencer adapters near impossible,I am gauging interest at the moment to see if it is worth investing some time and money into getting spares.
I may have a few of these for sale,will be finding out for definate in the next couple of days,was thinking £30 posted,plus may have complete valves,exhaust valves,synthetic stocks etc.Hope this is ok with the mods.
Please show your interest in any of these spares and i will see what i can do,cheers Mark.
http://i511.photobucket.com/albums/s...ceradapter.jpg
Good deals with,pesca,eragon,old bull,twotitans,paladin,gman,howard6750,rafferty,ca v123,lucky trigger,gt550a,bassmanrich,munchman,snipperuk,dm80 ,ali d,ranger,gubby_uk,deadly,gedfinn 2,viper77765,I. J.,SCOTTK,stanbridge,gmac,FRENCHI,2240phil,Gwylan, the piercer
Please excuse my ignorance but is the silencer adaptors a new manufactured part, like the Whisperer adaptor, or a modification of the existing foresight unit?
ATB
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
_______________________________________________
Done my bit for the BBS: http://www.airgunbbs.com/showthread....-being-a-mod-… now I’m a game-keeper turned poacher.
I would also be interested in a silencer adapter,please let me know when they are available.
Hi,these are new units not modded originals,i shall hopefully be receiving a unit in the next couple of days to try on my own innova,if everythings ok,i shall try and get a batch and sell them to all interested parties,cheers Mark.
Good deals with,pesca,eragon,old bull,twotitans,paladin,gman,howard6750,rafferty,ca v123,lucky trigger,gt550a,bassmanrich,munchman,snipperuk,dm80 ,ali d,ranger,gubby_uk,deadly,gedfinn 2,viper77765,I. J.,SCOTTK,stanbridge,gmac,FRENCHI,2240phil,Gwylan, the piercer
I'm interested in a silencer adaptor as shown in your photo. I assume it is threaded 1/2"UNF.
I'd also be interested in an adaptor threaded M12x1.25 if that could be supplied, as I have a Japanese made moderator with this metric thread size.
I've no need for valve parts at the moment.
A synthetic stock (Puma?) would not be of interest to me, but I could use a SHARP moulded buttplate if you could obtain one from the same source.
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Hi All,update on the silencer adapters,it arrived today but unfortunately it isnt 1/2 unf it looks to be m12 by 1.25,but would need to find a silencer to verify,if anyone can help please let me know,cheers Mark.
Good deals with,pesca,eragon,old bull,twotitans,paladin,gman,howard6750,rafferty,ca v123,lucky trigger,gt550a,bassmanrich,munchman,snipperuk,dm80 ,ali d,ranger,gubby_uk,deadly,gedfinn 2,viper77765,I. J.,SCOTTK,stanbridge,gmac,FRENCHI,2240phil,Gwylan, the piercer
think we have some m12 nuts at work mark . will drop one in for you to try if your at work tomorrow ?
Nice one Andy
Good deals with,pesca,eragon,old bull,twotitans,paladin,gman,howard6750,rafferty,ca v123,lucky trigger,gt550a,bassmanrich,munchman,snipperuk,dm80 ,ali d,ranger,gubby_uk,deadly,gedfinn 2,viper77765,I. J.,SCOTTK,stanbridge,gmac,FRENCHI,2240phil,Gwylan, the piercer
That's good news for me if it is M12x1.25, as I bought one of the 'genuine' Sharp moderators that were on some time ago, and that's what the thread measures. (Although the box seems to indicate m12x1 ?) I asked about the metric thread in my post above.
I will gladly buy this adaptor from you and post a reply if my Japanese made moderator fits it.
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?
Hi,At the moment its the only one i have so would rather hang onto it for now,but i will let you know once i find out the thread,cheers Mark.
Good deals with,pesca,eragon,old bull,twotitans,paladin,gman,howard6750,rafferty,ca v123,lucky trigger,gt550a,bassmanrich,munchman,snipperuk,dm80 ,ali d,ranger,gubby_uk,deadly,gedfinn 2,viper77765,I. J.,SCOTTK,stanbridge,gmac,FRENCHI,2240phil,Gwylan, the piercer
Make sure it's the right pitch M12
Metric course is 12mm x 1.75 pitch
Metric fine can be 12mm x 1 pitch, 12mm x 1.25 pitch or 12mm x 1.5 pitch
This site has useful thread charts, http://www.newmantools.com/tech/threadmf.htm
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?