Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 35

Thread: HW 35 Piston Seal Change

  1. #16
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by coburn View Post

    Despite mine and many peoples love of the HW80, the 35 is the better sub 12ftlb (and a bit above in some cases) air rifle.

    I could never work out why people went out and bought a de-stroked HW80 for field target use in the 1980s.

    Why not just tune a HW35 which is already a de-stroked 80 ?

    Am I missing something ?


    All the best Mick

  2. #17
    Join Date
    Dec 2006
    Location
    Battle, East Sussex
    Posts
    2,650

    Hw35

    I agree why destroke an 80 when a 35 would do the same job. Perhaps it was fashion or people did not like manual barrel lock on the 35, or perhaps the 35 was seen as old hat!. Couldn't have been a power issue Venom were advertising 35's in various tunes up to 14.5ftlbs. They also listed a FT special 35 with reduced recoil and improved accuracy.

    The other trend from the 1980's I don't like was the chopping of barrels down to 14", OK on a std 80 or 35 but criminal on an Export.

  3. #18
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by coburn View Post
    I agree why destroke an 80 when a 35 would do the same job. Perhaps it was fashion or people did not like manual barrel lock on the 35, or perhaps the 35 was seen as old hat!. Couldn't have been a power issue Venom were advertising 35's in various tunes up to 14.5ftlbs. They also listed a FT special 35 with reduced recoil and improved accuracy.

    The other trend from the 1980's I don't like was the chopping of barrels down to 14", OK on a std 80 or 35 but criminal on an Export.
    Hi Coburn

    The 35 will run at 12ftlbs quite happily with a shorter stroke so perhaps the one piece cocking arm of the 80 which supposedly gave a lighter cocking stroke was the answer.

    In my mind this is as near to the correct use of an 80 as you can get.

    http://i1138.photobucket.com/albums/...1012006191.jpg

    A HW80 running at 21ftlbs being used to put meat on the table by some bloke.

    After all it's the power level they were designed to run at.



    All the best Mick

  4. #19
    Join Date
    Mar 2006
    Location
    Nearest Town, Watlington, Oxon
    Posts
    2,235
    had one serial 8451** it had the nylon washer double sided safety and 11mm rail.



    ATB
    Daryl

  5. #20
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by muzzle View Post
    had one serial 8451** it had the nylon washer double sided safety and 11mm rail.



    ATB
    Daryl
    Cheers Daryl

    That confirms what info we have so far is correct.



    All the best Mick

  6. #21
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719
    Quote Originally Posted by T 20 View Post
    Cheers Ian

    And noted.

    First HW rifle produced: 1951
    5100 Manufactured 1955
    5138 Manufactured 1955
    31151 Manufactured 1955
    44485 Manufactured 1956
    51322 Manufactured 1956
    58446 Manufactured 1957
    72243 manufactured 1959
    76244 Manufactured 1960
    120662 Manufactured 1962
    142447 Manufactured 1964
    149423 Manufactured 1965
    195863 Manufactured 1965
    200000 manufactured 1966
    241065 Manufactured 1966
    395231 Manufactured 1968
    296000 Manufactured 1969
    309345 Manufactured 1969
    322960 Manufactured 1969
    332966 Manufactured 1969
    333015 Manufactured 1969
    333219 Manufactured 1970
    346900 Manufactured 1970
    357053 Manufactured 1970
    373816 Manufactured 1970
    375788 Manufactured 1970
    400000 Manufactured 1972
    401391 Manufactured 1972
    423452 Manufactured 1972
    469655 Manufactured 1973
    480574 Manufactured 1973
    496842 Manufactured 1973
    512990 Manufactured 1974
    583245 Manufactured 1975
    600000 Manufactured 1976
    612502 Manufactured 1976
    613000 Single sided safety introduced ?
    623997 Manufactured 1976
    624554 Manufactured 1976
    670138 Manufactured 1977
    671143 Manufactured 1977
    702045 Manufactured 1979
    741394 Manufactured 1979
    755000 HW35 changes from 12mm to 9mm scope rail
    778058 Manufactured 1980
    785538 Manufactured 1980
    800000 Manufactured 1980
    843636 HW 35 changes from Leather to Nylon Piston seal and double sided safety.
    890268 Manufactured 1980
    902189 Manufactured 1981
    902315 Manufactured 1981
    926011 Manufactured 1983
    1000000 manufactured 1983.
    1000375 manufactured 1983
    1001845 manufactured 1983
    January 1984 MK 1 HW 77 released in UK
    1003486 was delivered in 1984
    1003582 was delivered in 1984
    1003986 manufactured 1984
    1007970 manufactured 1984
    1011026 was delivered in 1984
    1011108 was delivered in 1984
    1016650 was delivered in 1985
    1016823 manufactured 1985
    1023310 manufactured 1985
    October 1985 MK 2 HW77 released in UK
    1032802 purchased new 1986
    1036521 was delivered in 1987
    1036528 was delivered in 1987
    1041261 was delivered in 1987
    1139541 was delivered in 1988
    1139761 purchased new 1988
    1178259 born 1989
    1181401 was delivered in 1989
    1181555 was delivered in 1989
    1181588 was delivered in 1989
    1182580 manufactured 1990
    1183140 bought new in 1990
    1186081 manufactured 1990
    1188451 was delivered in 1990
    1233526 Manufactured in 1991
    1288125 was delivered in 1993
    1288752 manufactured 1993
    1289991 manufactured 1993
    1302969 manufactured 1993
    1364279 was delivered in 1994
    1370364 produced in 1995
    1446049 HW 77 switch from 25mm to 26mm cylinder
    1459697 was delivered 1998
    1538821 bought new in 2001
    1551576 was delivered in 2001
    1576934 was delivered in 2002
    1616583 produced in 2004
    1687223 was delivered in 2006


    All the best Mick

    Hi Mick

    I have this HW35e (22" barrel) that isn't marked as HW and no reference to Weihrauch or Mellrichstadt bay whatsoever but is simply marked as EUSTA in a horizontal diamond..
    The seial# is 620032 and produced in '76- Fergot to say- 13mm rails..

    I emailed Weihrauch for any info pertaining to the rifle but didn't receive a reply

    Pic 1

    Pic 2

    Single sided safety
    Pic 3



    John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  7. #22
    Join Date
    Dec 2006
    Location
    Battle, East Sussex
    Posts
    2,650

    Hw35

    Nice Dog, whatever happened to that bloke?

    Looks like we've found out a lot on this thread. One thing I always wanted to know is at what point did HW change the delux/luxus stock on the 35 from the Bayern Cheekpiece version to the one with the Monte Carlo cheekpiece ala 80. It was some years before the 80 appeared. I've seen the M/C Luxus with serial numbers in the low/mid 700000's but I must admit to never seeing the earlier Bayern stock in the flesh.

  8. #23
    Join Date
    Dec 2006
    Location
    Battle, East Sussex
    Posts
    2,650

    Hw35

    Johnbaz

    My theory on Rifles like yours badged Eusta, Hoffman and possibly Burgo as well, were made by HW for large German retailers who wished to use a propriety name to pass the products off as theirs.

    Many Originals were rebadged for sale in the States and Crosmans were rebadged for sale by the likes of Sears Roebuck.

    Its only my theory and could well be absolute c**p. Someone on here Garvin or Fraktor perhaps could offer more info?

    By the way thats a cracking 35E. The quality of HW's of the 70's and 80's is beyond question. I think the woodwork began to loose its quailty towards the end of the 80's.

  9. #24
    Join Date
    Nov 2008
    Location
    Preston
    Posts
    3,278
    you know what, after reading this I think I need a 35e for the collection. If anyone has a nice one with open sights let me know, I may well purchase!

  10. #25
    Join Date
    Dec 2006
    Location
    Battle, East Sussex
    Posts
    2,650

    Hw35

    Now these are 35's

    http://i451.photobucket.com/albums/q...oburn/HW35.jpg

    And here are my two.

    http://i451.photobucket.com/albums/q...rn/HW35003.jpg


    Notice the Bayern luxuy model in the brochure from the early 70's

  11. #26
    Join Date
    Nov 2001
    Location
    Blackburn, Lancs. (under a bridge)
    Posts
    22,944
    Quote Originally Posted by coburn View Post
    Now these are 35's

    http://i451.photobucket.com/albums/q...oburn/HW35.jpg

    And here are my two.

    http://i451.photobucket.com/albums/q...rn/HW35003.jpg


    Notice the Bayern luxuy model in the brochure from the early 70's
    I have never seen this Bayern luxury stock in the flesh. The DELUXstocks I have are the squarer front ended walnut ones which, to be truthful, aren't my favourites.

    Interesting thread this.

    ATB
    Ian
    Founder & ex secretary of Rivington Riflemen.
    www.rivington-riflemen.uk

  12. #27
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by coburn View Post
    Nice Dog, whatever happened to that bloke?
    I don't know Coburn

    But there's a bloke who looks like he could be his dad on page 76 of April's Airgun World.


    All the best Mick

  13. #28
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by johnbaz View Post
    Hi Mick

    I have this HW35e (22" barrel) that isn't marked as HW and no reference to Weihrauch or Mellrichstadt bay whatsoever but is simply marked as EUSTA in a horizontal diamond..
    The seial# is 620032 and produced in '76- Fergot to say- 13mm rails..

    I emailed Weihrauch for any info pertaining to the rifle but didn't receive a reply

    Pic 1

    Pic 2

    Single sided safety
    Pic 3



    John

    Nice one John

    It looks like that one is pre barrel pivot shims as well, same as my old girl.

    I bought the shims from John Knibbs then struggled like hell to get them in only to find out later on here that it shouldn't have them.

    Anyway seeing as this thread has become a HW35 show and tell here's mine

    http://i1138.photobucket.com/albums/...Picture007.jpg

    (sorry I only have one picture of it)

    After buying 2 early MK2 HW77ks and an Airsporter S off a mate of mine for £90 the 3 in 1986, he vanished into the coal shed and came back out with this 35 and gave it to me for free.

    It's cost me a small fortune since then in machining and workshop time, but who cares.

    After fixing the porous breach I decided to have a play with it.

    She's been stroked up to 71mm (standard 65mm) then de-stroked down to 52mm and the spring guide and top hat are made from stainless and I've had both factory piston head types fitted as well as a few brass and alloy heads but at the moment it has a Bowkett style twin O ring aluminium piston head.

    And I've not finished playing yet.



    All the best Mick
    Last edited by T 20; 19-03-2011 at 07:09 AM.

  14. #29
    Join Date
    Dec 2006
    Location
    Battle, East Sussex
    Posts
    2,650

    Hw35

    Just been shooting my HW55 serial no 878*** which had a leather piston washer fitted so it would appear that whilst the 35 got the nylon washer at the same time as the intro of the 80. The 55 and I suspect the 50 as well continued with the leather washer.

    Until when is the next question we need to answer.

    Agreed Mick that fellow in AGW this month must be his dad.

  15. #30
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,125
    Quote Originally Posted by coburn View Post
    Just been shooting my HW55 serial no 878*** which had a leather piston washer fitted so it would appear that whilst the 35 got the nylon washer at the same time as the intro of the 80. The 55 and I suspect the 50 as well continued with the leather washer.

    Until when is the next question we need to answer.
    Hi Coburn

    I have a bit of a theory on that.

    Just as the HW35 changed to a nylon seal with the introduction of the HW80, could it be that the 25mm cylinder Weihrauch guns changed from leather to Nylon seals with the introduction of the HW77 in january 1984 ?

    Though it would seem strange if Weihrauch did carry on producing leather seals at 25mm four years after the introduction of the 30mm Nylon seal.



    All the best Mick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •