Results 1 to 3 of 3

Thread: CP88 Double Action Problem :(

  1. #1
    Join Date
    Apr 2010
    Location
    Bradford
    Posts
    35

    CP88 Double Action Problem :(

    Hello ladies, gents and other beings, this afternoon i thought i'd make the most of the weather and shoot my cp88 in the garden. However i found that o couldn't shoot in double action :O
    There didnt seem to be enough power to get the pellet from the clip, the hammer doesn't seem to go anywhere near far enough back.
    If anyone could help me it would be massively appreciated, thanks all.
    -Josh

  2. #2
    magicniner is offline The Posh Knocking Shop Artist Formerly Known as Nocturnal Nick
    Join Date
    May 2009
    Location
    Rotherham
    Posts
    5,314
    Take the right hand grip off, lift out the little spring which holds the trigger bar up.
    Gently open the spring up a bit & try it again, the spring seems to lose it's oomph over time and can let the hammer drop much too early if insufficient lift is applied.
    Let us know how you go on
    Regards,
    Nick
    Airgun Repairs, Bespoke Airgun Smithing and Precision Engineering Services
    http://www.magic9designltd.com

  3. #3
    Join Date
    Apr 2010
    Location
    Bradford
    Posts
    35
    Thanks for the reply Nick but I'm afraid i had no luck with that :/ i just shot it at my hand (unloaded ofcourse) and i couldn't feel any co2 at all and there was no noise either..
    -Josh

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •