Results 1 to 12 of 12

Thread: Brocock Concept Super Six .22

  1. #1
    Join Date
    Nov 2010
    Location
    Newcastle upon Tyne
    Posts
    35

    Brocock Concept Super Six .22

    Hello all, this is my first review of an air rifle on here so I'll try my best to explain in detail about my Brocock Concept Super Six .22.

    First of, the rifle came in a rather modest looking plain white box with Brocock printed in large letters in their usual lettering and also with 'Designed & Manufactured In England' proudly printed on the side. On opening the box I found a great deal of padding, a large peice of thick jagged form layered across the bottom with the rifle on top and a thin layer of felt over the rifle, so lots of padding & lots of protection. If you don't have a gun bag, gun case or even a gun safe, you could easily store this rifle in its orginal packaging when not in use & not worry about it being accidently dropped etc - stored in a safe, secure place too of course. The manual is very easy to follow and an adapter is also included.

    Out of the box, when first handled the rifle certainly feels like a quality product & it can't be ignored that someone has very much put a lot of effort in producing this rifle and it must be pointed out that this Concept Super Six was actually made to order so if you want one you might have to wait a little while for it, I waited a little over a week but it was well worth it. However I'm not sure how much of the rifle was already ready to be put together so you might have to wait a bit longer.

    The sporter stock of the Concept Super Six is made of walnut and what a lovely peice it is too & is ambidextrous. The pistol like grip has very nice palm swells on either side with two thumb groves laying parallel to each other for when or if you wish to shoot in the 'thumbs up' position. The chequering on the pistol style grip and on the fore end grip panels is millimetre perfect that has a slightly rough but pleasant feel to them with Brocock engraved on the bottom of the grip which gives it a rather nice touch. The cheek rest is of medium height and features two nicely placed lines curving around and blending into the butt just a few inches shy of the grip while at the rear of the butt, you have an adjustable butt-pad that can be simply adjusted to move up or down giving precision eye/scope alignment.

    The action of the Super Six is, like the stock, simple, basic lines through out, basically no-nonsense here, however there are some very good looking shades of black on the action that don't match the colour of the barrel, cylinder, spacer, trigger and trigger guard - there must be every shade of black used here and it really makes the rifle stand out and I like it a lot. The bluing on the barrel and cylinder looks stunning and it actualy looks wet and is fitted with nicely machined end caps, but you'll need an silencer adaptor if you want to fit a silencer and to be honest you need one because the muzzle crack is rather loud. I'm thinking on buying myself a Parker Hale to fit to it, and an adaptor too of course. While on the subject of the barrel, there was a few reviews done in the past about the Concept stating that the barrels were from Loather Walther and later BSA, I can confirm that the barrel on my Super Six, and other Brocock models too for that matter, are neither of those but are actually from Weihrauch.

    The metal trigger is of a simple, straighforward yet totally suitable of a design and is adjustable for first stage travel and weight of pull & is finished in matte black where as earlier single shot Concepts were made of brass. I believe the trigger guard on earlier single shot Concepts were plastic, not 100% sure, but this one is metal and like the trigger is finished off in matte black.

    The stainless steel side bolt of the Super Six is a totally different design to what I had seen on previous models which had the traditional looking bolt with a ball on the end, this is a very different design. It is difficult to describe so I'll try my best in doing so. It is quite thick & chunky which looks to have a "double ball" about a little over an inch apart from end to end that are joined/blended with an inner curve yet straight piece that also has five grooves which are nice & grippy, then theres a piece about an half inch long connected to the black metal bolt that fitted inside the action. I must admit that when I first noticed that it had this bolt I felt a little dissapointed, I was expecting the traditional looking one, however after spending some time with the rifle it has very quickly grown on me over a short period of time, it has a very nice feel to it and is beautifully machined piece of metal that gives the Brocock Concept's old sniper rifle kind of style a slightly futuristic look. Given the choice now it'd have to be this new looking side bolt.

    On operation the bolt felt slightly stiff but thats just with it being fresh from the factory, with use it is becoming silky smooth with a healthy sounding 'click-clunk-click, click-clunk-click'. It has two keeper slots, one for when rifle is loaded or keeping the push rod in the breech after when you're done using it and another slot for when you're loading and unloading the magazine.

    The aluminium magazine holds six .22 pellets and has a synthetic pellet-retaining band around it's perimeter. The very first image I seen of the Super Six had a bright Ferrari red coloured mag, other colours were mentioned to have been tested were blue and green. The last review(s) I read of this rifle, they were featured with polished aluminium mags and it was stated that future Concept Super Six's mags would possibly be anodized black. However, the mag on my rifle is of a rusty/brown colour & I must say it suits the rifle rather well. It is about the diameter of a £1 coin and is very easy to take out of the & put into the action. As well as being yet another simple feature of the Concept, it is totally fool proof & is impossible to place in rifle the wrong way round. It has two small ball bearings of different sizes, the bigger one at the rear of the mag and a smaller one at the front, its just a matter of clicking it into place & there you go. Although most people will remove the mag to laod it with pellets, however it is possible, if a little fiddly, to load pellets while the mag is placed into the rifle. But I'd just rather remove it completely.

    Fitted with a Nikko Stirling 4-12X50 AO MountMaster, the Super Six handles fantastic, it comes to the shoulder swiftly and while shouldered it is very easy to operate the side bolt. Being at a height of 5'11" with fairly big hands with piano fingers and a slim build, I'm finding the Concept Super Six easy to operate when standing, sitting and in the prone position - with the rifle unloaded I've been holding the rifle in various positions to just get the feel of it and as I say I'm finding it easy and to be quite honest, I don't understand some reviews of both Concept types in one particular air gun magazine...On a couple of occasions it was criticised for being too light weight and the barrel being too thin and could be prone to damage if dropped...Well from what I can tell the barrel is as solid as you'd like it to be despite being only a 10 or 11mm and it being a Weihrauch, well, the name says it all & besides - don't drop it then. They obviously missed the 'lightweight hunter rifle' part.

    Anyway...

    As of yet, I'm unable to test the Super Six's accuracy at further distances due to bad weather but I have tested it at slightly over 20 yards. I placed the rifle on a secure, solid bench via a little wooden stool, with this the rifle didn't move a millimetre and I wanted to test its own accuracy potential and not mine as a person. With the Super Six zeroed in, I put a full mag of six pellets through the same hole at 10 yards, another six through the same hole at 15 yards and the same at slightly over 20 yards, but about eleven shots fired at the latter - although 2-3 were slightly off but that was own fault. All I can say is ruddy impressive!!! Then just I got ready to test it at further distances, enter the weather with heavy rain & besides it was getting too dark to do any more, apart from the weather I was left grinning from ear to ear.

    During that short but sweet test session, I must have fired the rifle about, must be a good few over 50 times with pellets during zeroing and shooting targets plus a few dry firings in a safe environment just to make sure all was working well at first, this from a full charge of 200 bar. When it came to filling it back up, I used an FX 3 stage stirrup pump (I bought this with the rifle, great bit of kit) & topped the rifle back up to its recommended fill pressure, it took a handful of strokes but I took my time with it, I just slowly filled it up without any effort. Now I'm just waiting for the weather to be good so I can do some more testing.

    Overall, I love this rifle to bits & I believe its well worth the money, £425. If you want a no-nonsense multi-shot rifle, this is it. It shoots great, feels nice, handles great and looks quite stunning despite its modest looks. There is one or two things that might be of concern to some people, the first being the muzzle, at 10mm you'll need to fit an adaptor so you can use a silencer with an 1/2" thread. The other being a safety catch, this rifle does not have so extra care is needed. I understand that Brocock greatly disapprove of safety catches as they believe they take away dicipline of the shooter. However, the Super Six does have a sort of safety, simply pull back the bolt and place it into the rear keeper slot then when you're 100% sure you're going to shoot live, push the bolt forward placing a pellet in the breech with the bolt in it's forward keeper slot. I understand them and they do have a point in a way, it all comes down to common sense in the end and where theres common sense theres a same, controlled environment.

    I hope this review isn't too long winded to read & I hope its of interest. Like I say I need to do a few more shooting/test sessions (which reminds me, need a chrono) and I'll post some results and I'll try & get some pics up aswell.

    If theres any questions you'd like to ask, please don't hesitate to do so.

    Kind regards
    'It's possible. The point is getting away with it. And speaking as a professional, that's a very important consideration.'

  2. #2
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Thanks for the review.

    I found it particularly interesting because I've just got hold of a Contour Super 6 in .22. Like you, I'm enjoying shooting it, and have only one criticism of the design (so far!).

    The problem is that the plate supporting/protecting the ratchet for the magazine screwed to the L/H side of the action block occupies a high proportion of the space that would otherwise be available for the optics rail, with the result that there is only just enough left for a set of standard mounts and no room to adjust the position of these to obtain the correct eye relief. Consequently, I have had to mount a scope via a single double-strap mount clamped to the forward section of rail. Do you find this lack of rail space a problem with the Concept S6 as well?

    Also, what's you're Concept doing power-wise? The Contour S6's power is on the conservative side, with most values in the high 10s, and a maximum recorded ME of 11.4 FPE. As regards filling, when topped up to 200 bar, the Contour takes around 10 shots to reach its velocity "plateau", so for optimal accuracy it's preferable to fill to around 175 bar, which will give around 20-25 good shots, depending on the pellet type used. Is this the case with the Concept too?

  3. #3
    Join Date
    Nov 2010
    Location
    Newcastle upon Tyne
    Posts
    35
    You're welcome, and thank you.

    Yes, indeed I indeed did find there was a lack of space on the rail. I've just measured it and theres around 35mm of space on the front rail and around 32mm on the rear. But I must admit I didn't find the lack of space a problem. I have a Nikko Stirling 4-12x50 MountMaster fitted which is just slightly over 14" long, I have the rear mount fitted as far as it'll go back and the front mounted as far as it'll go forward - theres exactly 4 and half inches seperating the mounts when measured from the inside. I also have the mag ring of the scope 1mm away from the mount and it feels really good when shouldered, very comfortable. I'm planning on purchasing an MTC 10x44 Viper & I'll place the mounts in the same position as they are now - the Viper is more or less the same length as the Nikko so no problems there.

    However, if you're finding the lack of rail space a problem you could probably look into a buying a rail extension of some sort or maybe even get one made to order to suit, although it may cost a few quid but I'm sure it'd be money well spent, then it'd just be a matter of fitting lower mounts to compensate in height. Or rather than go through all that you could just go for a mount that has just two Alan key screws rather than four, you could save a few millimetres by doing that, whatever you find easier. I do really hope you find a solution.

    Power wise for the Concept, I hadn't a chrono with me at first but my friend managed to find his just after mid test session on my mid 30th or shot & we managed just three live shots before the chrono stopped working for some reason & before the weather went bonkers. If I remember correctly the readings were something like between 11.1 & 11.4(?) Ft. lbs using Air Arms Diabolo Field 5.51mm (can't remember the bar fill at that point), but I'll need to purchase a chrono in the near future and do some thorough testing.

    In the Brocock manual they actually state that a small amount of experimentation may be needed with the fill pressure to achieve the best results. They also state for the Concept you'll get 60+ full power shots in .22. I don't remember how many they state for a .22 Contour? When first filled I done a few dry shots to make sure things were working fine so I didn't get the chance to find out how many it takes to get to optimum performance.

    I was going to do some testing today but the weather is being difficult & it looks to be even worse tomorrow according to the weather view- blasted weather!

    Does your Contour have the same side bolt as mine? And does your stock come in black? I heard that the initial Contour Super Six .22s come in this colour? And is it the XL version?
    'It's possible. The point is getting away with it. And speaking as a professional, that's a very important consideration.'

  4. #4
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Quote Originally Posted by jackal View Post
    I indeed did find there was a lack of space on the rail. I've just measured it and theres around 35mm of space on the front rail and around 32mm on the rear. But I must admit I didn't find the lack of space a problem...
    I'm able to mount a scope in the available rail space, albeit only full-length scopes with plenty of tube, but what I can't do is mount them with the correct eye relief as they place any scope much too close to my eye.

    I thought I might get around this by using my Connect 01, which has zero eye relief but there's not enough room to mount it either.

    ISTM that Brocock should have been aware of this issue, and either re-designed the side plate to minimise it, or designed a dedicated bridging rail to compensate for it.

    Quote Originally Posted by jackal View Post
    Does your Contour have the same side bolt as mine?
    Yes. And I like it. like the Contour, it's as compact as possible, yet still very tactile, and moving to a side-bolt configuration means you can cock the action without changing your head position, and that cuts down on the time required for a second shot.

    Quote Originally Posted by jackal View Post
    And does your stock come in black? I heard that the initial Contour Super Six .22s come in this colour? And is it the XL version?
    The first Super 6 I saw at a show had a black stock, but mine has a natural beech colour. There are no XL markings on it either, so I wonder if Brocock have dropped this nomenclature, or perhaps it is only applied to the walnut-stocked guns?

  5. #5
    Join Date
    Nov 2010
    Location
    Newcastle upon Tyne
    Posts
    35
    Quote Originally Posted by Mr. Gain View Post
    I'm able to mount a scope in the available rail space, albeit only full-length scopes with plenty of tube, but what I can't do is mount them with the correct eye relief as they place any scope much too close to my eye.

    I thought I might get around this by using my Connect 01, which has zero eye relief but there's not enough room to mount it either.

    ISTM that Brocock should have been aware of this issue, and either re-designed the side plate to minimise it, or designed a dedicated bridging rail to compensate for it.
    The only way I can think of getting around the problem is purchasing a bridging rail of some sort and possibly, if needed, a set of low mounts to compensate in height. Personally, I'm contemplating on getting a hold of one in case I plan on purchasing a bigger scope in the future, I might not need it but its nice to know theres a solution at hand if needed. I think you can get one for about £25 or £30, maybe even cheaper.

    I agree though, Brocock really should have been aware of this & maybe if they recieved a few emails explaining such problems then maybe they could come up with something. They probably could re-design the side plate but I'm not sure how they would do this, I personally really like what they've done with the Super Six series & I think they're onto a winner here. As the old saying goes, 'Where you gain an advantage area, you sacrifice in another' & I believe its the case here with single shot Concepts & Contours and their multi-shot cousins.



    Yes. And I like it. like the Contour, it's as compact as possible, yet still very tactile, and moving to a side-bolt configuration means you can cock the action without changing your head position, and that cuts down on the time required for a second shot.
    As I mentioned before, when I first purchased my Concept I wasn't too sure about it & must admit, I felt a bit gutted I didn't get the traditional looking bolt, but after operating it a few times, I'm totally sold. In terms of overall looks, I think it makes a rifle with old fashioned, Bavarian sniper rifle looks have a slightly futuristic style to it. It compliments it very well.

    I wouldn't mind doing a little experimentation in the near future concerning the side bolt. Looking at the rear of the main bolt, theres a small Allen key screw which I believe if un-done, releases the side bolt free from the main bolt. But I'm going to do a lot of thorough research on how to do it before I even think of attempting a side bolt change.

    I found this:

    http://www.uttings.co.uk/Product/761...ssic-fn-model/

    It looks as if it'd fit but going of pictures alone obviously isn't enough & as I say, I'm going to do some thorough research before attempting anything.



    The first Super 6 I saw at a show had a black stock, but mine has a natural beech colour. There are no XL markings on it either, so I wonder if Brocock have dropped this nomenclature, or perhaps it is only applied to the walnut-stocked guns?
    I really wouldn't know. I don't why they would only apply the XL markings to the walnut stocked guns and the beech versions - they're exactly the same rifle, just different woodwork. Come to think of it, the markings on my Concept are slightly different to what I've seen advertised. I really liked the look of the black stock Contour though even though I haven't came across one in person.

    Just wondering, are you planning on fitting a silencer of any kind? I'm getting myself a Parker Hale MM1 on Monday and a silencer adaptor too.

    Word of advice on the adaptor, make sure you shop around before you purchase one. I went into one place here in Newcastle & the guy is selling them for £20. I went to another one where I got my Concept from & they sell them for £10.

    Concerning the silencer & all. The reason why the Parker Hale MM1 is budget reasons first and foremost. At £30 its a good price when compared to other makes and when tested in Airgun Shooter a year or so ago, via a Daystate, it was the second quietest out of ten silencers tested 61.7 dbA. The quietest was the Webley QGS at 61.6 dbA which is priced at, as much as it makes no difference, around the £50 mark the last time enquired.

    So the Parker Hale MM1 it is then.

    Not sure about your Contour, but I find the muzzle crack of my Concept quite ruddy loud.
    'It's possible. The point is getting away with it. And speaking as a professional, that's a very important consideration.'

  6. #6
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Quote Originally Posted by jackal View Post
    Just wondering, are you planning on fitting a silencer of any kind? I'm getting myself a Parker Hale MM1 on Monday and a silencer adaptor too. [...] Concerning the silencer & all. The reason why the Parker Hale MM1 is budget reasons first and foremost. At £30 its a good price when compared to other makes and when tested in Airgun Shooter a year or so ago, via a Daystate, it was the second quietest out of ten silencers tested 61.7 dbA. The quietest was the Webley QGS at 61.6 dbA which is priced at, as much as it makes no difference, around the £50 mark the last time enquired. So the Parker Hale MM1 it is then. [...] Not sure about your Contour, but I find the muzzle crack of my Concept quite ruddy loud.
    I think it's a given that PCPs require silencers for hunting, and for back garden plinking for that matter, and the Contour is no exception. My silencer adapter was £9. I already had a compact Brocock silencer for an Aim-X pistol, which does about 85% of what a larger silencer will do on the Contour, but the adapter lets me fit my carbon-fibre Daystate unit, and this (unsurprisingly) gives better results, albeit at the price of a little more length and weight.

  7. #7
    Join Date
    Nov 2010
    Location
    Newcastle upon Tyne
    Posts
    35
    @Mr. Gain,

    I bet your Contour XL looks rather dashing with that carbon-fibre Daystate fitted to it? I've always thought that particular model would look the part with various bits 'n' pieces added to it.

    I just bought myself a silencer and adaptor for my Concept. Paid £9.99 for the adaptor and £32.50 for a Parker Hale MM1. The Parker Hale is fantastic at suppressing the Concept's muzzle crack. When live firing with the Parker Hale fitted, I just get a dull 'pfft'. After a few shots you forget theres any sort of sound coming out of it. Although quite heavy, I believe it was the heaviest by a big margin out of 10 other silencers on test in an issue of Airgun Shooter, it compliments the Concept Super Six's weight. When in standing or kneeling position with the rifle shouldered, it feels very nicely balanced and also with a Nikko Stirling 4-12x50 AO MountMaster fitted.

    At just shy of 7 inches long and approximetaly 23mm in width, its not at all bulky and feels to be just at the right length and looks wise, it suits the rifle very well. Build wise, I can just say its built like a brick & I really wouldn't like a bonk over the head with it. The end cap feels stiff to undo but I'm not going to attempt to get inside it as I don't really feel the need to anyway, being fitted to a PCP I don't believe it would need to be stripped to be cleaned as one would have to with a rimfire, but if you have to, it comes supplied with an alignment tool to make life easier when putting it back together again. Overall I'm 100% chuffed with the Parker Hale - I'd recommend it to anyone.

    With the MM1 silencer and adaptor fitted, the whole rifle now measures just under 43 inches long.

    As regards filling, when topped up to 200 bar, the Contour takes around 10 shots to reach its velocity "plateau", so for optimal accuracy it's preferable to fill to around 175 bar, which will give around 20-25 good shots, depending on the pellet type used. Is this the case with the Concept too?
    I managed to find an hour or so to do some live shooting testing today. If I remember correctly the rifle wasn't full at 200 bar. I fired around 10 dry shots yesterday to test the Parker Hale & to show friends, they were very impressed I might add, topped the rifle back up and safely fired 2 live shots later on to test how quiet it'd be during live firing, even more impressive. So came today. With the MM1 now fitted, I had to re-zero my scope, this only took 3 live shots - was only a few clicks out.

    First of I must admit, I enjoyed myself a bit too much today and I lost count of how many shots I fired, after all it was the first real time I've used the rifle for any length of time...But good fun neverless. On a guess I probably fired around 40-45 shots before they started to drop off. All shots were taken at just 10 yards, supposedly it was meant to be more about bar testing and shot counts rather than accuracy at various ranges but as I say I enjoyed myself a bit too much, so all of that went out of the window, my bad...But great fun. Anyway...I'm believing it was under the 200 bar fill up.

    I really ought to take some notes next time.

    Concerning the drop off shots, at 10 yards the drop off point went from centre of zero (of which was spot on) to just below and to the first mil dot. Even on the mil dot the shots were spot on. A very good barrel on this rifle.

    I may have fired a few too many shots at this point and the cylinder was much as it makes no difference, simply put...As empty as you could get it. Doing this learnt me a valuable lesson, that lesson came when I had to fill up the rifle from empty using a FX 3 stage stirrup pump to 200 bar...It was a bit of a work out & I don't really want to do that again. But lesson learnt anyway. Once I get the shot counts and best bar fill ups sorted, I'm going to just top the rifle up every 30 shots or so, much easier.

    So after getting the Concept filled up to exactly 200 bar, I fired a single shot at a target at the mere 10 yard range I set up and it hit spot on the centre of zero of my crosshairs just as the others did pre the 200 bar fill up.

    Hopefully tomorrow, I'll have time to do a shot count and fill bar test & of course, take some notes. I'm expecting around 60+ shots as Brocock state one should get in a .22 Concept. So a bit of experimentation to do.

    Mr. Gain, isn't the Contour XL stated to give around 40+ shots in .22? And which pellets have you tried and prefer to use?

    When I'm almost done with my tin of Air Arms Diabolo Field 5.51mm's I think I'll try some JSBs.
    'It's possible. The point is getting away with it. And speaking as a professional, that's a very important consideration.'

  8. #8
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Rather late in the day...

    I've figured out what the XL designation means.

    Xtra Long... (who'd have guessed!)

    i.e. an extended reservoir for a higher shot count per fill. My Contour has the standard length cylinder -hence no XL markings, and a run of just 20-25 good shots.

  9. #9
    Join Date
    Nov 2010
    Location
    Newcastle upon Tyne
    Posts
    35
    Ah I see, I knew the XL stands for 'Extra Long', but I thought you had that version & not the other Contour. Hence why I was a little confused why yours didn't have the XL markings.

    The XL has a bracket holding the barrel & cylinder in place too, like the Concept variants. Don't the Contours come with gun bag too?

    Was just wondering, Mr.Gain. Do you use a dive bottle to top-up/fill-up your contour?

    After using the FX stirrup pump a few times I've been looking into purchasing a 3 litre dive bottle. Although the FX is a great bit of kit, I'm topping up every 15-20 shots or so to save on effort which is fine by me, but theres always going to be times when I've fired 60+ shots without topping up on various occasions & its just a bit of a effort - hence showing growing interest in a dive bottle.

    As I say, I'm looking for a 3 litre dive bottle (nothing huge or too heavy) but I'm not sure how many fill-ups I'd get from it (my Concept having a slim line 200BAR cylinder).

    Many thanks.
    'It's possible. The point is getting away with it. And speaking as a professional, that's a very important consideration.'

  10. #10
    Join Date
    Feb 2006
    Location
    SW Birmingham (Rubery Rednal)
    Posts
    1,670
    Quote Originally Posted by jackal View Post
    Don't the Contours come with gun bag too?
    No. It would be nice if they did a dinky little bag for it though.

    Quote Originally Posted by jackal View Post
    Was just wondering, Mr.Gain. Do you use a dive bottle to top-up/fill-up your contour?
    Yes. I dive as well, so it's a no-brainer really.

    Quote Originally Posted by jackal View Post
    As I say, I'm looking for a 3 litre dive bottle (nothing huge or too heavy) but I'm not sure how many fill-ups I'd get from it (my Concept having a slim line 200BAR cylinder).
    If you see yourself shooting PCPs for years to come, then I'd invest in a full-size 10l or 12l cylinder as well as a portable jobbie: it's well worth the convenience. I've a pair of 300-bar 10s that keep me shooting for the whole autumn/winter period without a refill but with a little gun like the Contour I've been thinking it would be nice to have a handy 3l topper-upper to keep in the wagon or day sack.

  11. #11
    Join Date
    Feb 2012
    Location
    gateshead
    Posts
    25,965
    as im looking for a nice small karbine,i thought your review was good and i will be ordering one shortly

  12. #12
    Join Date
    Aug 2009
    Location
    Saltash,Cornwall
    Posts
    230
    I have a Brocock contour in .22,single shot with a Hawke Panorama scope and a hw silencer, it's deadly, one of the best rifles I have ever owned. Cheers
    Ps if you are ever thinking of stripping down my advise is don't bother they are a right pain in the backside.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •