Hi Martyntin,
Could you not get the barrel 1/2" screwcut?...or have an adaptor made up to the O/D of your barrel to use a HW or other mod?...
Just picked up a MK2 Phoenix myself and I'm loving this short order can bashing lark, great fun!
Just bought a skan r32 and find its a bit louder than i'd like does anyone have any tips on quietening it down/fitting a silencer, i am sure i have seen 1 before with a silencer fitted.
Hi Martyntin,
Could you not get the barrel 1/2" screwcut?...or have an adaptor made up to the O/D of your barrel to use a HW or other mod?...
Just picked up a MK2 Phoenix myself and I'm loving this short order can bashing lark, great fun!
blah blah
Sorry are you saying the end plug is 1/2 unf ? if so just screw a male silencer straight on same as an AA510.
No i mean it has an end plug in which i can take out and then i'll need a fitting the same diameter which will fit back in the shroud but with an 1/2 unf thread on it to fit a silencer to. The plug thats in there is held in by a grub screw it does not have a thread on it like a daystate adapter.
A friend of mine cut the barrel and shroud all back a few inches, and then fitted a silencer to it.
Weihrauch B&C HW95K, B&C HW35K, BAM B26-2 venoman custom, QB78 DL custom.
You ain't so big, you jus' tall, tha's all.
http://ukchineseairgunforum.myfreeforum.org/index.php
Weihrauch B&C HW95K, B&C HW35K, BAM B26-2 venoman custom, QB78 DL custom.
You ain't so big, you jus' tall, tha's all.
http://ukchineseairgunforum.myfreeforum.org/index.php
Leupy might do them
Its a problem I had,but I took the measurments down to a machine shop and they knocked me 2 up for me
but there should be plenty on here who do them ?
JASON..
lots of takedowns
I had a female adaptor made up which slides down into the shroud. The grub screw holds it in place. Added a male adaptor to the HW and it works well.
NB the barrel does not meet the adaptor so the pellet is flying free within the shroud before it enters the silencer so the adaptor need to be accuratly made.
I would add a picture of it but I cant see how to when replying to these posts?