Results 1 to 10 of 10

Thread: Which torque screwdriver?

  1. #1
    Join Date
    Feb 2007
    Location
    Cannock
    Posts
    686

    Which torque screwdriver?

    Hi guys,

    This is something I've thought about getting before, but never followed up. Just wondering what make / model people are using.

    After doing a very quick scan of what's for sale, two have caught my attention, the Wheeler FAT screwdriver and the Sealey.

    Does anyone have either of these and would they recommend it or something else?

    Cheers,



    Mark.

  2. #2
    Join Date
    Nov 2008
    Location
    Brighton
    Posts
    21
    I've got a couple for rifles.
    A snap on screwdriver type and a torque leader dial gauge mini wrench.

    The screwdrivers are very convenient - but the £200+ Snap-on driver has failed twice on me leaving fastenings being done up way too tight till I noticed the error.
    I've since reverted back to my old dialed mini wrench (which I picked up from an autojumble for £40). The advantage of the dial is that the torque is always being read out meaning you've got a bit more control and feeedback than with the clutch slip type screwdrivers.

    The wrench is like this one link and I'd thoroughly recommend.

  3. #3
    Join Date
    Jan 2008
    Location
    bury st edmunds
    Posts
    83
    I actually work for sealeys mate , I have to test all the sample tools before saying if we can sell them or not, if you want I'll get one from stock and give it a good testing and check it on our calibrator to see if they are accurate
    Daystate Airwolf
    BSA R10 MK2
    BSA Scorpion Se

  4. #4
    Join Date
    Oct 2006
    Location
    Stowmarket, Suffolk
    Posts
    198
    Gedore do a decent one, and Fultons of Bisley did have a second hand one in when I last visited.

    Dom.

  5. #5
    Join Date
    Dec 2008
    Location
    Warminster, Wilts
    Posts
    726
    Mark,

    If you're not set on a screw driver take a look at the Borka torque wrench, very simple and not expensive.

    see: http://www.borkatools.com/pages/atd12/mtsd.html

    Brgds Terry

  6. #6
    Join Date
    Nov 2008
    Location
    Brighton
    Posts
    21
    Quote Originally Posted by another_dom View Post
    and Fultons of Bisley did have a second hand one in when I last visited.
    Dom.
    Yup - I saw that too.
    Same as the ones issued by DSG for maintenance. I think it was up for only £40 or so too.
    Who knows whether the calibration is still good though. One of these I think......


  7. #7
    Join Date
    Feb 2007
    Location
    Cannock
    Posts
    686
    Thanks for all the feedback guys.

    I actually decided on a Wheeler FAT wrench. I chose it based on the good reviews from some American forums, price was also a factor.

    Cheers,


    Mark.

  8. #8
    Join Date
    Dec 2008
    Location
    Peterborough
    Posts
    3,495
    Quote Originally Posted by mjoseph View Post
    Thanks for all the feedback guys.

    I actually decided on a Wheeler FAT wrench. I chose it based on the good reviews from some American forums, price was also a factor.

    Cheers,


    Mark.
    Mark, I see you posted this a year ago almost, that'll give you perfect opportunity to use the torque driver and give some honest advice / experience. Looking at getting one myself, always gone by hand pressures previously, but always handy to know all the scope bolts are to the same loads.

    Would you recommend it?

  9. #9
    RobinC's Avatar
    RobinC is offline Awesome Shooting Coach and Author.
    Join Date
    Feb 2009
    Location
    Gt Yarmouth
    Posts
    1,335

    Torque Wrench

    I use a Sealey STS100 2 - 10 Nm, easy to use, cheap, chunky with a good grip. I got it calibrated as soon as I got it just to be sure and it was spot on. I have used it on our smallbore and fullbore rifles with no problem.
    The only part problem I have is the scale is a bit crude so 6 is easy to see, even going halfway to 7 for 6.5 but any thing finer is a guess, so if you want accuratly 6.1 or so its not ideal. Having been to two top world champion target rifle manufacturers and asked the sport technicians who look after the top teams what torque they set to and been told they do it by hand by feel I think the Sealey is accurate enough for me! I always intended to look out for another one with a better scale but there is not much about in the lower sizes thats a lot better.
    Robin
    Walther KK500 Alutec expert special - Barnard .223 "wilde" in a Walther KK500 Alutec stock, mmm...tasty!! - Keppeler 6 mmBR with Walther grip and wood! I may be a Walther-phile?

  10. #10
    Join Date
    Dec 2008
    Location
    Peterborough
    Posts
    3,495
    Quote Originally Posted by RobinC View Post
    I use a Sealey STS100 2 - 10 Nm, easy to use, cheap, chunky with a good grip. I got it calibrated as soon as I got it just to be sure and it was spot on. I have used it on our smallbore and fullbore rifles with no problem.
    The only part problem I have is the scale is a bit crude so 6 is easy to see, even going halfway to 7 for 6.5 but any thing finer is a guess, so if you want accuratly 6.1 or so its not ideal. Having been to two top world champion target rifle manufacturers and asked the sport technicians who look after the top teams what torque they set to and been told they do it by hand by feel I think the Sealey is accurate enough for me! I always intended to look out for another one with a better scale but there is not much about in the lower sizes thats a lot better.
    Robin
    Having a quick look on google, its not actually cheap but quite a bit more expensive than the FAT wrench

    I guess I'll pocket my money for the time being

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •