-
webley alecto silencer
/hi,
my mate has a webley alecto,
he wonts to know if you can fit a silencer to these pistols?
thanks in advance.
-
Hi mate
When I had one I sent it here
http://www.leupyscustomshop.co.uk/co..._zs=1317465560
Very good work, and very quiet with a hw mod.
At the time it was £80 but it could be more if he has changed his prices.
Hope that helps
-
Sorry if this is posted twice, my phone died as a submitted 1st post.
http://www.leupyscustomshop.co.uk/co..._zs=1317465560
I had mine (now sold) done here.
-
I did mine on the cheap.Used an airarms s400 silencer adapter,10mm,it's a tight fit on the barrel.I removed the barrel by taking out the 2 screws that hold it near the breech and loosened the grub screw under the barrel at the muzzle end.I tapped the adapter on and put the barrel back in so far,gave the adapter some heat and burnt it in gradually until it reached the breech.Replaced the 2 screws and holder to clamp the barrel in and tightened the grub screw which gripped the barrel at the muzzle end and so trapped the adapter so it was solid.I put some tape on the adapter as I scratched it,I'll paint it sometime,maybe.
I'm a bit of a butcher but it works great,I also cut a slot in the overlever to fit a weaver rail for a red dot while I was at it.If you intend keeping the gun it's a cheap solution.
http://i116.photobucket.com/albums/o...n/P1120005.jpg
-
thanks for replies,i will pass them on to him.
-
Alecto silencer.
Recieved pm,Thanks for that.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules