Page 1 of 2 12 LastLast
Results 1 to 15 of 26

Thread: FX Verminator MkII review.

  1. #1
    Join Date
    Aug 2009
    Location
    Leamington Spa
    Posts
    396

    FX Verminator MkII review.

    Updated: Custom Silencer added. See post 16.
    Updated again: Bipod issues. See post 17.
    I got the call on Friday, ""Your MkII Verminator has arrived", and took an extended lunch break to collect it.

    First impressions were, bloody hell, it's tiny and not being of the slightest build I had concerns over whether it would fit me. In two minutes of arriving at Kibworth, the MkII was out the case, assembled and in my shoulder. It fitted like a glove, without adjustment. I'm sure with a bit of fine tuning it will be even better.
    It comes in a plastic case with cut out foam to store it in it's take down state. I won't be taking this down and I have an Logun short tactical case to carry it in, which fits like a glove.

    A few more minutes later after parting with the necessary, Andy and Rob in the shop had filled it and chrono'd it. I thought 10.5ft.lb a bit low, but it's new, at one end of it's power curve and we used a light pellet for the test. I'll put a few hundred pellets through it and see how it settles in.

    I was little disappointed that the extra expansion chamber silencer, mentioned by Terry Doe in the Airgun World article, was not in the box. I'll be talking to ASI and FX about this.

    Fast forward to Saturday morning: I tried my Viper Connect on the MkII and it fouled the magazine with high mounts! I've got one of the dedicated Sportmatch mounts on order but it's not arrived yet. A quick rummage in my shooting box and a trip to Godiva Guns and I had a mount that would get me going for today.

    Finally, I was at the range, everything ready, signed in and said hello to the lads.
    First job was to figure out how to use the mag. You've got to rotate the clear cover to tension the spring and feed a pellet backwards from the front of the mag. The rest of the pellets are fed more conventionally from the back of the mag. It's a bit fiddly to start with, and I reckon very soft skirted pellets could get damaged if you misalign them as they're pushed in backwards, but after a few reloads, you soon get the knack. Snow and freezing conditions didn't help with reloading, so another mag is going on order Monday.

    The first 50 pellets were disheartening, 25 yds grouping was 2-3"! I know I'm not that bad a shot. I thought; what have I done; have I a bought a duff one; having visions of my new rifle playing postal ping-pong with the importer/manufacturer. All I can say, is, if this happens to you, stick with it, get some lead down the barrel. I tried 50-60 pellets of numerous pellet brands until I settled on the Daystate Range Master Li's in 0.22”.
    I haven't done any paper punching yet, and only had the paint to chip off the 25 yds range chequer plate, but I'd say grouping is approx 15mm c-c.

    The shrouded barrel works quite well. It's a lot quieter when firing a pellet than dry firing, but no where near as quiet as a HW silencer, but the sting is taken out of it. This is where the extra expansion silencer will be needed. There's a threaded finishing ring that comes off to reveal a non standard male thread. Maybe UK Neil or other silencer makers could create something dedicated to the MkII. (Neil I'll send you a PM in the next few days)

    I've got to mention the side lever action. This is the first rifle I've owned with this type of action. Always had bolt action PCP's. The action is slick with cycling effort being minimal. Meaning I can reload without taking the rifle from the shoulder or eye (This is something I couldn't do with my AA TDR). That's got to be worth something for consistency. The last bit of travel, where you've got the most mechanical advantage, cocks and engages the sear.

    Without the front air tube, FX has fitted a simple pull-out cover using an oring to seal against dirt and retain it in the stock. Remove the cover and you find a standard quick release connector. To my surprise, my bottle, with a Best Fittings QRC fitted and charged without a problem. A QRC and Dowty seal are provided by FX. If you wanted, it is possible to charge the bottle off the gun. Handy if you have a spare.

    An unanswered question for me is how to attach a bipod to the MkII. There are no swivel studs; the fill cover is only retained by an o-ring. It is a snug fit. Maybe a multiple o-ring fill cover replacement bipod mount may work. I’ll get in touch with ASI/FX to see if there’s anything available or planned. I can envisage a range of push in torch mounts which could be nice.

    So why did I choose the Verminator MkII; simple, I was looking for a multi-shot in 0.22", I'd been messed around by Theoben in trying to spec an S-type (wanted to visit factory to select stock, I was told no factory visits = no sale) and I love the way my classic Titan MPT sits in the shoulder and the ease of taking standing shots.

    Here a link to a few pictures:
    http://s1197.photobucket.com/albums/...inator%20MkII/

    I’ll report back when I’ve tried it in the field.

    The big question is; would I recommend the MkII to anyone else. In short, yes, it might not be to everyone’s taste, but the handling, slick side lever, faultless mag cycling and high shot count makes the MkII very versatile and a joy to shoot.
    Last edited by westy306; 15-02-2012 at 10:37 PM. Reason: added pictures

  2. #2
    Join Date
    Jun 2005
    Location
    ABERGAVENNY: S.WALES
    Posts
    484
    Nice report and can't wait to see the pics.

  3. #3
    Steve Valentine Guest
    Great review, I have a MK1, it's the shortest rifle I've owned and was also worried that it wouldn't fit, but there is plenty of adjustment in the stock length.

    Doubt I'll be trading it in for a MK2 though.

  4. #4
    Join Date
    Mar 2010
    Location
    West Yorkshire
    Posts
    2,892
    Great write up, looking forward to pic's and seeing how you get on with it the more it settles down and you get used to it

  5. #5
    Join Date
    Dec 2010
    Location
    North London
    Posts
    591

  6. #6
    Join Date
    Apr 2003
    Location
    Malton,North Yorkshire
    Posts
    1,600
    It's good to hear the Mk2's are finally arriving in the country. I'd like to have a play with an FAC one(would sit nicely alongside my custom FAC Mk1).

  7. #7
    Join Date
    Aug 2009
    Location
    Leamington Spa
    Posts
    396

    Pictures been added and answer to what mounts.

    Pictures have been uploaded; link is in the original post.


    The mounts are a temporary bodge until the dedicated Sportsmatch mount arrives.

    I've used a cheapy 11mm dove tail to weaver rail/riser block and medium weaver rings.

    Any questions or requests for further photos, just ask.
    Last edited by westy306; 05-02-2012 at 09:50 PM.

  8. #8
    Join Date
    Sep 2007
    Location
    Hull
    Posts
    2,376
    Can we assume it is the smooth twist barrel? Your comments about the groupings suggest that it be more pellet fussy than has been suggested?

  9. #9
    Join Date
    Aug 2009
    Location
    Leamington Spa
    Posts
    396

    Pellet fussy?

    The 2-3" groupings were with the Rangemaster Li's, which came good in the end.

    It's only had about 500 pellets through it so far; so early days really.

    I'll revisit each brand of pellet in the fullness of time.
    Last edited by westy306; 05-02-2012 at 11:02 PM.

  10. #10
    Join Date
    Mar 2010
    Location
    West Yorkshire
    Posts
    2,892
    The pic's are good, the Vermy looks a great bit of kit, enjoy

  11. #11
    Join Date
    Jul 2010
    Location
    Leamington Spa
    Posts
    297
    I was with westy yesterday and he was kind enough to let me have a quick shoot of the new Vermy now i shoot a Brocock concept super 6 so its pretty light anyway, but the vermy was just a revelation absolutly fantastic bit of kit ! shoulders very well too. Only problem i found is the sudden urge to go purchase one ???????????????

  12. #12
    Join Date
    Apr 2006
    Location
    Stamford
    Posts
    3,561
    Good review. I am a fan of the mk 1 verminator and have since steered towards daystates. That said looking at the mk2 verminator I may be swayed to get a cheeky one as my ratting rifle.

  13. #13
    Join Date
    Feb 2012
    Location
    Hereford
    Posts
    23
    Cracking gun now I want 1 ha
    Wish list

  14. #14
    Join Date
    Dec 2004
    Location
    nr bishop auckland durham
    Posts
    2,295
    looking at the pics the cocking lever is not able to change sides unlike the mk1 so not so good for the lefty shooters.

  15. #15
    Join Date
    Aug 2009
    Location
    Leamington Spa
    Posts
    396

    Custom silencer added.

    One week on, the novelty factor has worn off and I'm getting used to shooting the MkII.

    As I reported in my original review, I thought the shrouded barrel was OK, but no where near as quiet as a HW silenced air rifle. I'm still waiting for an answer back from FX about the extra expansion chamber.
    Impatience set in and I contacted U.K.Neil about making a custom silencer.

    After a few PM's we had dimensions agreed.
    I picked this up this morning from U.K.Neil at the Greyhound.
    Here's a few pictures:
    http://s1197.photobucket.com/albums/...om%20Silencer/
    To help others wanting to do the same, here's some useful info:
    MkII shroud outside diameter is 28mm (the same as U.K.Neil's standard silencer)
    Male thread on shroud is M20 x 1.0mm pitch x 8.0mm thread length (to clear)

    I haven't decided what finish to have on it yet, but in terms of silencing abilities, it's spot-on.

    Thank you U.K.Neil for a quick turn round and a first class product.
    Last edited by westy306; 14-02-2012 at 12:44 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •