Page 7 of 8 FirstFirst ... 5678 LastLast
Results 91 to 105 of 113

Thread: Bsf - Bavarian Air-rifles

  1. #91
    Join Date
    Feb 2007
    Location
    Malmoe Sweden
    Posts
    94
    Have you guys seen this?
    A rare BSF mod 65 for sale http://www.tradera.com/bsf-modell-65...1784_153551482


    Andy

  2. #92
    Join Date
    Nov 2001
    Location
    Blackburn, Lancs. (under a bridge)
    Posts
    22,944
    Quote Originally Posted by BSF55 View Post
    Have you guys seen this?
    A rare BSF mod 65 for sale http://www.tradera.com/bsf-modell-65...1784_153551482


    Andy
    Rare? Nah! As common as dog muck. I think Ive got one knocking around somewhere.

    ATB
    Ian
    Founder & ex secretary of Rivington Riflemen.
    www.rivington-riflemen.uk

  3. #93
    Join Date
    Aug 2008
    Location
    aberdare s wales
    Posts
    3,598
    I thought you IJ was the only living human to actually have seen one let alone own one are you going to get this one as well!

  4. #94
    Join Date
    Mar 2012
    Location
    Near Auckland
    Posts
    1,320

    Images of S70

    This should work.
    The images are not in any particular order but they will allow you to see the condition of the BSF.
    When it arrived I only put one slug through it. Some one has previously been hammering it beyond safe.....

    http://img.photobucket.com/albums/v3...0/IMG_5689.jpg

    http://img.photobucket.com/albums/v3...0/IMG_5695.jpg

    http://img.photobucket.com/albums/v3...0/IMG_5696.jpg

    http://img.photobucket.com/albums/v3...70KAL45017.jpg

    http://img.photobucket.com/albums/v3...70KAL45021.jpg

    http://img.photobucket.com/albums/v3...0/IMG_5708.jpg

    http://img.photobucket.com/albums/v3...pse0bee584.jpg

    The gauged stock? I think that I will clean that up and lay in some glue/timber mix. Or perhaps fill with resin with an insect inlay? The cocking arm link pin is a beauty, right??
    Last edited by slow_runner; 21-03-2014 at 11:08 PM.

  5. #95
    Join Date
    Nov 2001
    Location
    Blackburn, Lancs. (under a bridge)
    Posts
    22,944
    Quote Originally Posted by fat man View Post
    I thought you IJ was the only living human to actually have seen one let alone own one are you going to get this one as well!
    That would verge on obsessive.
    I thought I was the only one with a Dremel engraver.

    ATB
    Ian
    Founder & ex secretary of Rivington Riflemen.
    www.rivington-riflemen.uk

  6. #96
    Join Date
    Aug 2008
    Location
    aberdare s wales
    Posts
    3,598
    Quote Originally Posted by I. J. View Post
    That would verge on obsessive.
    I thought I was the only one with a Dremel engraver.

    ATB
    Ian
    Well at least there is a pic of another one now anyways.

  7. #97
    Join Date
    Feb 2007
    Location
    Malmoe Sweden
    Posts
    94
    The price right now on this auction site is about 262 GBP
    Its a good price for a BSF mod 65


    Andy

  8. #98
    Join Date
    Mar 2012
    Location
    Near Auckland
    Posts
    1,320

    Only two in existance?

    Andy, it might have fetched twice as much if not for Ians' beauty.

    Jokes aside, but not for long; does anyone have a manual in PDF that covers the S70 they would like to send?
    Second to that, what number of coils, gauge, length, I.D and O.D of the mainspring?
    My mainspring is reasonably straight but I am unsure if it has a set, or if it is original

    Cheers.
    Last edited by slow_runner; 23-04-2012 at 02:55 AM.

  9. #99
    Join Date
    Jan 2013
    Location
    Pinetown
    Posts
    2

    Patrick

    Hi - I am in South Africa.
    My name is Patrick.
    I have a BSF Underlever which I think is a S54 - I have somehow managed to lose the blade fitting from the foresight. It was not triangular in shape, but simply a low straight piece with a slight ridge along the length of the top.
    Does anyone have a picture of such a blade, and also picture of the S54 or any other BSF Underlevers showing the whole gun - from fore sight to the end of the stock.
    I have seen various pictures of BSF guns, but most of the do not show the WHOLE gun !
    Can anyone tell me where I can obtain a blade for this gun.
    TANGUVELLYMUCH.

  10. #100
    Join Date
    Jun 2014
    Location
    Frankston
    Posts
    5
    I've got a Model 50 on it's way to me (should be here early next week).

    You don't hear or see much info on the 50, can anyone give me any info on it please?

  11. #101
    Join Date
    Feb 2007
    Location
    Malmoe Sweden
    Posts
    94
    BSF Mod 50 is more like a upgraded Mod 45. Difference is that it have another stock and adjustible sight

  12. #102
    Join Date
    Dec 2004
    Location
    Prestwood, Great Missenden
    Posts
    278

    Another BSF

    Just come across this thread having been away. I too have a .177 BSF S54 under lever with loading tap. As someone said previously very well built. Must also put a few pellets through it sometime although fairly certain it could do with a bit of internal fettling, as I seem to remember the firing cycle was a bit harsh.

    Cheers, Phil

  13. #103
    Join Date
    Nov 2012
    Location
    Hereford
    Posts
    3,101
    Had this paperwork when I bought my BSF50, if anyone's interested:


  14. #104
    Join Date
    May 2014
    Location
    plymouth
    Posts
    22

    S70

    hi guys...I owned an S70 in the late 70's and was a nice little gun. if I remember right it was an expensive gun and a little austere compared to the FWB's and Weihrachs. a brilliant little gun and would love to own a S70 or B55 again

  15. #105
    Join Date
    Jan 2007
    Location
    Plant City FL, 22 miles east of Tampa
    Posts
    1,453
    Quote Originally Posted by Hsing-ee View Post
    I have e-mailed Macarri about a synthetic piston head for the B55 and got the reply that if the piston was machined like a Diana, one of his seals would fit. Wasn't very clear about how the piston should be machined. Here is the message

    Dear sir,
    Sorry we do not make any. If you turn the piston head down like a
    Diana,
    then you can fit an Apex small.



    Thank You!
    Karen Hughes- Sales
    ARH
    www.airrifleheadquarters.com

    Anyone know how you turn down the piston head?
    He means that you need to lathe cut it to a dovetail just like the TX200.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •