having read the Webley strip Guide, did my first strip and lube..

bit of fun this morning .. well you have to start somewhere...!

understand the trigger setup much better now
there's no second stage, so the sear spring is only to 'set' the sear
the 'weight' is the force necessary to pull the sear down from the piston latch and so is fixed......note techie explanation....

the piston seal looked really good

anyway, cleaned and lubed spring, piston and links. polished where the trigger touches the sear - prob 0% useful, but it felt good...

http://i1176.photobucket.com/albums/...s/a0ecc6aa.jpg