Results 1 to 9 of 9

Thread: Original model 50

  1. #1
    Join Date
    Dec 2005
    Location
    Grays Essex
    Posts
    400

    Original model 50

    Can any member advise me what is the black in the Chequering on the Stock.
    I'am stripping the stock back to original wood, the chequering is badly worn.
    Is this black stuff rubber or paint. I have removed most bu can still see shades of black.
    Can anyone advise what to do dye it black or leave and just dye the same as the stock with Walnut stain.

    Any advise would be appreciated.
    Winchester 9422 .22lr with a Bushnell Sports Chief 2-7x 32 - AA Mistral .22 with a Hawk 2-7x32
    Weihrauch 45 Pistol in .177 - Original 50 .22 with a Bushnell 3-9x40 - Browning SA .22lr

  2. #2
    Join Date
    Dec 2007
    Location
    Malta, sometimes London
    Posts
    5,881
    Not sure but seems to be black anyway on most, you may have difficulty to get it out, so leave it in. I think you have a (relatively) later model, with pressed "inverted diamonds" i.e. rather than raised they are sunken. Perhaps this is why you think the chequering is worn?

    I think you should not stain the stock, keep it original - lacquer it.
    **WANTED**: WEBLEY PATRIOT MUZZLE END; Any Diana/Original mod.50 parts, especially OPEN SIGHTS

  3. #3
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719
    As air-tech says, it's pressed in chequering so it will never feel 'crisp' as proper cut chequering (or checkering if you're a yank )does

    I've always thought it was just black paint that was put on the chequering (not sure though!)..




    Cheers, John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  4. #4
    Join Date
    Dec 2005
    Location
    Grays Essex
    Posts
    400
    Quote Originally Posted by air-tech View Post
    Not sure but seems to be black anyway on most, you may have difficulty to get it out, so leave it in. I think you have a (relatively) later model, with pressed "inverted diamonds" i.e. rather than raised they are sunken. Perhaps this is why you think the chequering is worn?

    I think you should not stain the stock, keep it original - lacquer it.
    I like a mat type finish, if you recommend not staining, would you suggest just to use true oil as i do not like lacquer.

    Danny
    Winchester 9422 .22lr with a Bushnell Sports Chief 2-7x 32 - AA Mistral .22 with a Hawk 2-7x32
    Weihrauch 45 Pistol in .177 - Original 50 .22 with a Bushnell 3-9x40 - Browning SA .22lr

  5. #5
    Join Date
    Dec 2007
    Location
    Malta, sometimes London
    Posts
    5,881
    Quote Originally Posted by alarabia View Post
    I like a mat type finish, if you recommend not staining, would you suggest just to use true oil as i do not like lacquer.

    Danny
    It's beech, you will struggle to make it look good (although a few have) with any oil or stain. You will also devalue the gun as it is no longer finished as-original.

    You can buy semi matte lacquers, that is not a problem, and if you would like to darken the stock, they come in different colours. By so doing you get an even finish, beech is notorious for selective uptake of stain.
    **WANTED**: WEBLEY PATRIOT MUZZLE END; Any Diana/Original mod.50 parts, especially OPEN SIGHTS

  6. #6
    Join Date
    Dec 2005
    Location
    Grays Essex
    Posts
    400
    Quote Originally Posted by air-tech View Post
    It's beech, you will struggle to make it look good (although a few have) with any oil or stain. You will also devalue the gun as it is no longer finished as-original.

    You can buy semi matte lacquers, that is not a problem, and if you would like to darken the stock, they come in different colours. By so doing you get an even finish, beech is notorious for selective uptake of stain.
    Could you suggest a make and which type of semi matte lacquers.
    Also should I re-paint or stain the chequered sections in black as they are patchy.
    Winchester 9422 .22lr with a Bushnell Sports Chief 2-7x 32 - AA Mistral .22 with a Hawk 2-7x32
    Weihrauch 45 Pistol in .177 - Original 50 .22 with a Bushnell 3-9x40 - Browning SA .22lr

  7. #7
    Join Date
    Dec 2005
    Location
    Grays Essex
    Posts
    400
    After 2 days rubbing down have decided after carefull consideration to apply a sealer and water based walnut stain, then True Oil, Beeswax finish.
    Cold Blue the barrel with G96 Gun Blue and hope for the best.
    Winchester 9422 .22lr with a Bushnell Sports Chief 2-7x 32 - AA Mistral .22 with a Hawk 2-7x32
    Weihrauch 45 Pistol in .177 - Original 50 .22 with a Bushnell 3-9x40 - Browning SA .22lr

  8. #8
    Join Date
    Jul 2006
    Location
    sheffield
    Posts
    6,719
    Quote Originally Posted by alarabia View Post
    After 2 days rubbing down have decided after carefull consideration to apply a sealer and water based walnut stain, then True Oil, Beeswax finish.
    Cold Blue the barrel with G96 Gun Blue and hope for the best.

    Tru oil will give you a very full gloss finish

    Good luck with the cold blue (i can't recall seeing a good job done by this stuff )


    Cheers, John
    for my gunz guitarz and bonzai, see here
    www.flickr.com/photos/8163995@N07/

  9. #9
    Join Date
    Dec 2007
    Location
    Malta, sometimes London
    Posts
    5,881
    Quote Originally Posted by alarabia View Post
    After 2 days rubbing down have decided after carefull consideration to apply a sealer and water based walnut stain, then True Oil, Beeswax finish.
    Cold Blue the barrel with G96 Gun Blue and hope for the best.
    If you buy a rattle can of coloured lacquer you will be done in 2 minutes flat and you will have a better end result, assuming the prep work has been done properly, which you must do anyway irrespective.
    **WANTED**: WEBLEY PATRIOT MUZZLE END; Any Diana/Original mod.50 parts, especially OPEN SIGHTS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •