Hi,
This might be of interest.
http://www.militaryrifles.com/belgium/Albini.htm
edit:- If you want to strip the rifle DO NOT undo the bolt that goes through the wood that has a large washer on either side. It does not hold the barrel in place and is only there to support the wood at the breech.
The base plug is pinned. This must be removed before it can be extracted.
The barrel/action is a hook breech and can be removed after the barrel bands have been removed. Don't forget to pull the hammer back to full cock first so the locking/firing pin is clear of the breech.
Atb