Pure guess. Do you pull the piston/spring back with some kind of tool or key?
Here's one of my mystery air pistols that I have had sitting in a drawer for a few years and I thought I would give it an airing. Anyone know anything about it?
http://i135.photobucket.com/albums/q...ps532a5b44.jpg
Now here's a challenge. Can anyone work out from the photo how it cocks and shoots ? (Not you Trev – I know you have seen it before). All will eventually be revealed with some extra pix. It is a springer, and in all fairness I should tell you that I have left a cocking aid out of the picture to make it a bit harder.
The pistol is well made, obviously very old and almost certainly of British origin. It is inscribed with the "PAT. 1876", the initials B & C, and the number 4. I have never been able to locate a relevant patent from that year, but if anyone knows otherwise I would be delighted to hear from you. It shoots darts with a pretty hefty punch.
Let's see whose the sharpest of them all.
Pure guess. Do you pull the piston/spring back with some kind of tool or key?
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Is it a pull out pop in?
As opposed to a push in pop out.
Or, if the barrel is fixed, then you poke a screwed rod into the back-end and pull the piston back to cock.
Last edited by magicesperanto; 14-10-2013 at 06:53 PM.
No, and no.
Hmmmm......
Is the piston pumped back with air pressure by any chance?
Is this a wind up?
Donald
Is the grip also the cocking arm
Isn't that a variant of the Pope pistol?
No, no, no and no.
So far one one of you has got nearer than anyone else, but still a way to go..
Looks like the knurled nut might be some kind of removable breech. Unscrew or pull out, insert pellet and replace?
As for cocking, I think its going to be decided by what the cocking aid looks like.. the spring and piston look completely enclosed. Assuming there isnt anything to see at the rear of the cylinder Im going for a rod down the barrel to push back the piston.
Donald
push the barrel in to cock?
The handle acts like a ratchet cocking the pistol.
Does the trigger and lower frame slide along the cylinder then back to retract the piston?
It looks very interesting and in great shape for its age. Where did you find it?
Cock it by pushing the piston back with a ramrod.
I collect vintage Japanese air rifles & vintage Japanese pellets
Information sought about antique firearms with Japanese markings, do you have one ?