I've also thought about this but cannot justify the price so am sticking with the drill and blow torch method unless someone comes up with a link to a reasonably priced machine.
Rick
Looking for a case annealing machine from the UK....anyone any ideas.
Life is too short, live it while you can. Sniper quote:- Why run you will only die tired.
I've also thought about this but cannot justify the price so am sticking with the drill and blow torch method unless someone comes up with a link to a reasonably priced machine.
Rick
It's not my faulty, I was just.....
The only two worth considering are the Giraud and the Benchsource, both I'm afraid are made in the USA, and I don't think Giraud will post outside of the US.
Unless a second hand Benchsource comes up for sale then you have several options, do them in a drill or pay someone to do them for you. Of course there's a third option and that is to make one yourself or pay someone to make something simple.
Sorry but I just don't think there's a big enough market in the Uk for someone to start making them commercially.
God has a hard on for green rifles
Might try to make one of these
http://youtu.be/8TUCJUtqqE8
Rick
It's not my faulty, I was just.....
try spud1967.com he offers a case annealing service,might be able to help,you can also find his website on the stalking directory.
See if this damn fine chap can give you a lead on where to get one or just use his service.
I tried to buy and ship the Giraud to the uk but federal laws will not allow the sale of automated reloading machines to outside the USA .
I did buy the bench source and had it shipped over without any problems I am very happy with it .its a very well made machine that's easy to set up and use .
There is a chap that makes the auto powder trickle who does make a machine but as one offs he contacted me after I did a similar post
it and um covers most problems in life
I though about buying a machine until I saw the price so I made this
http://youtu.be/z0TlctbLT3w
I am not an engineer and most parts came from the bay
I could take a few photos of the works if anyone is interested
Steve
Steve
Tikka T3 .204 & .223 Super Varmints - FX Cutlas .22 FAC Air - Sako Quad Varmint .17HMR & .22LR - Daystate Airwolf Tactical .177.
I'd buy one!
Steve, awesome job.
I already have a Benchsource but if you ever decided to make a few of these I would be interested, price dependent of course
God has a hard on for green rifles
I'd rather have a bottle in front of me than a frontal lobotomy!
A 7mm08 shooter
The push solenoid in a central locking solenoid from maplins I think it was less than a tenner I used the linkage rod that came with it and a small spring to return,as it was a little random with it's stop position.
The ferrel in the case I passed the rod through is a alluminium pot rivet if I recall a 5mm x 20mm of the type that does not leave the broken steel centre pin in.
Hope this is of help
Steve
Steve
I reckon you should take orders and build them lol
email...... stephenbarrow@ntlworld.com