Page 4 of 8 FirstFirst ... 23456 ... LastLast
Results 46 to 60 of 111

Thread: Just one question

  1. #46
    Join Date
    Nov 2009
    Location
    Monmouth, Land of Wales.
    Posts
    14,441
    Scope manufacturers - Why don't you paint little level markings on the sides of scope tubes? So that we could line up the scope in a minute, instead of half an hour using at least two bubbles and a plumb line.

    Is it because you can't possibly put the effing reticles in straight?

  2. #47
    Join Date
    May 2000
    Location
    Surrey
    Posts
    24,739
    Quote Originally Posted by where's it gone View Post
    ... what was the reason for Airgun World to revert back to the A4 size mag ? oh yes, cost ?
    No. Enough readers asked for it. We had about five times as many complaints as we had positive comments when we went oversize A4. We thought it was a good move, those who really matter thought it wasn't.

    Yes, there are slight savings, but resizing every template negates around two years' worth of anything saved, plus it's a pain in the arse to do, but the readers wanted it, so they got it. It really is that simple.
    If you don't know enough to judge - don't judge

  3. #48
    Join Date
    Jul 2007
    Location
    Northwich cheshire
    Posts
    882
    All makes, full power semi auto please.

  4. #49
    Join Date
    Mar 2005
    Location
    Northwich Cheshire
    Posts
    388
    Quote Originally Posted by 18 Wheeler View Post
    Air Arms: What were you using when you decided to put the "safety catch" in the trigger blade on the S400 series?
    That was my question!

    I'll ask AA Why do you persist on keeping the safety catch on the trigger blade! Crazy idea.
    BSA SuperSport

  5. #50
    Join Date
    Jun 2014
    Location
    Aylesbury
    Posts
    439
    Makers of the cheap, quirky, chinese guns - since when did shooters need 12" (that's 30cm to the enlightened) fingers to reach the trigger? And ssshhhhh dare I ask AA about AT?

  6. #51
    Join Date
    May 2005
    Location
    Hounslow.
    Posts
    4,201
    Another Daystate question. The filler cap on the Airwolf, why not a screw in instead of the push on ?

  7. #52
    Join Date
    Mar 2008
    Location
    yeovil
    Posts
    1,344
    Why do all manufactures produce rifles that one day i can hit everything i aim at then overnight they sneak in and change everything on my rifle and i can't get a decent grouping on a barn door!

  8. #53
    look no hands's Avatar
    look no hands is offline Even better looking than a HW35
    Join Date
    Apr 2003
    Location
    Telford, even closer to Tony L.
    Posts
    12,352
    Quote Originally Posted by Jake190 View Post
    BSA
    Why on earth did you discontinue the Superstar?.....the best springer you have ever made
    And the Airsporter (if you do remake it, decent trigger and cheek piece this time please)

    Pete
    Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in

  9. #54
    Join Date
    Jan 2013
    Location
    peterborough
    Posts
    864
    To OP


    why cant I have 2 questions

  10. #55
    Join Date
    Jul 2014
    Location
    Mountain Ash
    Posts
    678
    Quote Originally Posted by Two200's View Post
    Why is it £900 quid?
    plus 1

  11. #56
    Join Date
    Jul 2014
    Location
    Mountain Ash
    Posts
    678
    Quote Originally Posted by greenwayjames View Post
    Is that a message via a medium?
    ouch

  12. #57
    Join Date
    Dec 2011
    Location
    Preston
    Posts
    1,084
    Before sending me my new rifle, can you please test it for pellet grouping at 45 yards with every possible pellet and supply me with the test sheet thank you.
    Say what is true, although it may be bitter and displeasing to people.

  13. #58
    Herx77 is offline "Instruments of the light"
    Join Date
    Apr 2006
    Location
    Body boarding centre of Hertfordshire
    Posts
    1,666
    Quote Originally Posted by Two200's View Post
    Why is the plastic case you supplied it in too small for the gun when you fit a scope?
    Heh,Heh,Heh, .
    I think you can get a good few dozen eggs in them,carries them very safely.
    HERX77 .
    Fighter against the "Dark Arts" A stranger in an even stranger land.
    GC2+Leupold 14.4-34x45
    AA400 fac receiver+sidewinder 8.5-34x52
    Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
    Weihrauch HW90k
    Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
    Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
    Fwb 124 + Optima was good is good!
    Webley Vulcan.

  14. #59
    Herx77 is offline "Instruments of the light"
    Join Date
    Apr 2006
    Location
    Body boarding centre of Hertfordshire
    Posts
    1,666
    Daystate,when are they going to take the drawings out and produce the 'springer' due some years ago? .
    HERX77 .
    Fighter against the "Dark Arts" A stranger in an even stranger land.
    GC2+Leupold 14.4-34x45
    AA400 fac receiver+sidewinder 8.5-34x52
    Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
    Weihrauch HW90k
    Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
    Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
    Fwb 124 + Optima was good is good!
    Webley Vulcan.

  15. #60
    Join Date
    Nov 2008
    Location
    Sheffield
    Posts
    2,109
    Why do you make Stealths from Alloy - copper would have been better, as it is worth more when weighed in.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •