Admin Team
Scope manufacturers - Why don't you paint little level markings on the sides of scope tubes? So that we could line up the scope in a minute, instead of half an hour using at least two bubbles and a plumb line.
Is it because you can't possibly put the effing reticles in straight?
Administrator
No. Enough readers asked for it. We had about five times as many complaints as we had positive comments when we went oversize A4. We thought it was a good move, those who really matter thought it wasn't.Originally Posted by where's it gone
Yes, there are slight savings, but resizing every template negates around two years' worth of anything saved, plus it's a pain in the arse to do, but the readers wanted it, so they got it. It really is that simple.
If you don't know enough to judge - don't judge
Registered User
All makes, full power semi auto please.
Registered User
That was my question!Air Arms: What were you using when you decided to put the "safety catch" in the trigger blade on the S400 series?
I'll ask AA Why do you persist on keeping the safety catch on the trigger blade! Crazy idea.
BSA SuperSport
Registered User
Makers of the cheap, quirky, chinese guns - since when did shooters need 12" (that's 30cm to the enlightened) fingers to reach the trigger? And ssshhhhh dare I ask AA about AT?
Registered User
Another Daystate question. The filler cap on the Airwolf, why not a screw in instead of the push on ?
Registered User
Why do all manufactures produce rifles that one day i can hit everything i aim at then overnight they sneak in and change everything on my rifle and i can't get a decent grouping on a barn door!
Even better looking than a HW35
And the Airsporter (if you do remake it, decent trigger and cheek piece this time please)
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
Registered User
To OP
why cant I have 2 questions
Registered User
plus 1
Registered User
ouchIs that a message via a medium?
Registered User
Before sending me my new rifle, can you please test it for pellet grouping at 45 yards with every possible pellet and supply me with the test sheet thank you.
Say what is true, although it may be bitter and displeasing to people.
"Instruments of the light"
Heh,Heh,Heh,
I think you can get a good few dozen eggs in them,carries them very safely.
HERX77 .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
"Instruments of the light"
Daystate,when are they going to take the drawings out and produce the 'springer' due some years ago?
HERX77 .
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.
Registered User
Why do you make Stealths from Alloy - copper would have been better, as it is worth more when weighed in.
Posting Permissions
Reply With Quote
