Walther Century ??

[Sprog]

The DE spec LGV has a plastic blade, i have one here, it has 1 adjustment screw and not the 2 the metal blade has,I suspect the Century just uses the plastic blade to keep the cost down.

If im honest the feel of the plastic blade is really not bad, and one could mod the blade to have 2 screws if you really wanted. The plastic is not to givey so feels ok on the pull.

I hope you are wrong about this. Everything I've read says it's a 2 'adjustment' trigger, the manual, the Umarex site, even the review mentioned above shows photographs of a trigger guard with 2 holes and the appropriate screws beneath.

I believe a metal trigger blade is an optional extra or post-sale upgrade if you feel the need. I think the Century has a lot going for it, it reminds me of a modern version of the HW35, German, barrel catch, 30mm piston, 2 'adjustment' trigger ... I'm cautiously optimistic.

Hopefully the delrin ring on the rear of the piston works OK so you probably won't have to 'tune' it.

Bigtoe, thanks for the reply

[edit: appologies for (mis)using the term "2 stage trigger" when I meant a trigger unit with 2 adjustments. I am suitable contrite]