Or do I need a 232bar adapter?
Hi All,
Need to get an adapter for a HW100 Pre Quick Fill (Looks like this : http://www.bestfittings.co.uk/shopexd.asp?id=194) to fit a 1/8" Fill Line.
Would this be what I need : http://www.bisley-uk.com/product_v3.php?i=S211&c=354
?
Many Thanks,
James
Or do I need a 232bar adapter?
Not sure what you need,but the Cylinder (not a quick fill) must have a valve in it to hold air,Correct? an i guess you are filling that by a (divers) bottle, therefore can you not just get a connection to fit between the bottle hose an the cylinder ?
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
Just looked at your links (again) an i think you are right, providing you have the correct thread sizes ,
1 Rapid+sentinal n/v, 1 HW100+ Mamba lite
Yes, that is what you need
Ex-Airgunner
Thanks, my concern was the 232/300bar fitting, as I read the 300bar has a couple more threads, so I'm thinking it could possibly leak?
I'm just thinking if the HW100 filling adapter is 232bar and the adapter I get it 300bar - will it leak?
I was looking at the top of here, and I see there is a spacer...so it looks like I could be correct : http://www.airgunbuyer.com/Showprodu...20For%20Rifles
It will fit fine.
It refers to 300bar as that is what most DIN threadded bottles are. The 232bar weihrauch fitting that screws into this will fit fine, and as you are only filling to 200bar, it will not cause any issues froma 300bar tank. But i presume you are using this to connect to a pump?
Ex-Airgunner
Or try this if the one in your first post is too expensive: http://www.sportwaffen-schneider.de/...ducts_id/13297
Ex-Airgunner
don't you just screw the big brass bit into your air bottle directly, so no whip?
Either way, find a local hydraulic shop and they'll have an adapter nice and cheep.