-
Load data needed
I have just bought some 55 grn nosler varmageddon FBHP in .243 to try, i am going to use Blc-2 powder.Does anyone know where i can find the load data min and max for this bullet/powder combo.
-
load data
hi .try hogdon reloading site .A.T.B.alan
-
Tried it but nothing for that bullet.
-
I've got the Hogdens reloading "bible", nothing in it, found this tho, not sure if it's of any help...
https://www.loaddata.com/members/sea...etallicID=2946
-
46.8 MAX with bullet loaded .243 depth (I doubt you would go that deep) and that is using the previous 55 grain Nosler. If you worked from 45 grains and seated longer, I doubt you would get any problems.
-
Hodgdon reloading data
Starting load
Bullet - 55 grn Nosler BT
Powder - BL-C(2)
Calibre - .243"
COL - 2.650"
Starting load - 43.0 grains
Velocity 3,779 fps
Pressure 42,600 CUP
MAX Load
Bullet - 55 grn Nosler BT
Powder - BL-C(2)
Calibre - .243"
COL - 2.650"
Max load - 47.0 grains
Velocity - 4,025 fps
Pressure - 49,400 CUP
ATB
Alan
-
Thanks for the help chaps, i had seen the second load Alan has put up and was thinking i would use that as it worked for the sierra blitz kings. I just wasn't quite sure as these are not BT but HP, shouldn't make any difference though i would of thought.
-
-
A friend uses these for fox. Omg! Devastating, only down side is as he runs them at Max there is every chance he will need a rebarrel after a 1000 or so.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules