Remove connector when empty and fit new seals / connector ?
I think the regulator might be doing odd things, when I charge the guns reservoir with 300 bar, the air slowly leaks out of the male - over the course of five minutes the guns reservoir empties...what should I do?
Hope you can help
Regards
Ian
Remove connector when empty and fit new seals / connector ?
Give Daystate a ring on Monday.
Air Wolf, MCT, RWS 500, Daystate Mk3 Bullpup, Huntsman Mk2 Target Rifle, PH6, Anchutz, 7.62 Kongsberg, 7.92 Yugo Mauser and .22 Mauser.
its not rated to run at 300 bar if memory serves me right
I filled mine to 200 bar only which give 110 shots I'd check the tube to see the swp limit
sounds as the fill valve at the front is leaking you can try giving a sharp fill of air to see if it self seals
Gary
Last edited by Sportsmatch; 23-07-2005 at 09:53 PM.
ISP Airstream mk3 March F 2.5/25mml. Sportsmatch GC2 mk3 leupold 20/50 Steyr 2014 hft March x 5/50 MTR3 ISP Airstream MK3 March x 8-80 silver, fx impact m3 element helix Ripley AR4 blue Burris 8/32 Steyr 2014 hot all .177
Ditto, in fact I think it was 190 BAROriginally Posted by Sportsmatch
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Thanks all for the help on this...
Regards
Ian
My CRX has "SWP 3000" engraved on the action. That is 206 bar. The CR94 is a fair bit older - before 300 bar came into airgunning, I think. I would be very careful what you are doing there.
Keith